Impact of the Compaction and Curing on the Properties of Cement-Bitumen Treated Materials (CBTM)

Daniel Perraton; Alan Carter; Simone Raschia; Andrea Grilli; Andrea Graziani; Emiliano Pasquini; Patricia Kara De Maeijer; Davide Lo Presti; Marco Pasetto; Gabriele Tebaldi; Eshan Dave

doi:10.1007/978-3-031-94231-0_2

Impact of the Compaction and Curing on the Properties of Cement-Bitumen Treated Materials (CBTM)

Daniel Perraton
, Alan Carter
, Simone Raschia
, Andrea Grilli
, Andrea Graziani
, Emiliano Pasquini
, Patricia Kara De Maeijer
, Davide Lo Presti
, Marco Pasetto
, Gabriele Tebaldi
, Eshan Dave

Résultats de recherche: Chapitre dans un livre, rapport, actes de conférence › Chapitre de livre › Revue par des pairs

Résumé

The present chapter provides a synthesis of the research activity of RILEM TC 264-RAP Task Group 1 (Cold Recycling). This chapter is divided into 10 sections. First, an abstract is provided. Then, a brief introduction (Sect. 2.1) on quality control of Reclaimed Asphalt (RA) followed by the research objective and the approach used for the experimental activities. The main focus is on a better understanding of the impact of different aspects related to cold recycled material (CRM) mix design on their properties. The following section is dedicated to a literature review of the work done on CRM around the world, which is focused on the definition of CRM, on the mix design and on the laboratory procedures. Section 2.4 highlights the concepts of the volumetric approach applied to CRM while Sects. 2.5 and 2.6 report the experimental work results and the performed analysis with a qualitatively and quantitatively discussion on the outcomes. The conclusions of the research effort are finally summarized afterwards. Overall, the experimental activity and the analysis performed to support the idea of a volumetric approach proposed by Task Group 1 to quantify constituent proportions of the CRM based on the same concept already used for hot-mix asphalt (HMA) mixtures.

langue originale	Anglais
titre	RILEM State-of-the-Art Reports
Editeur	Springer Science and Business Media B.V.
Pages	5-98
Nombre de pages	94
Les DOIs	https://doi.org/10.1007/978-3-031-94231-0_2
état	Publié - 2025

Série de publications

Nom	RILEM State-of-the-Art Reports
Volume	44
ISSN (imprimé)	2213-204X
ISSN (Electronique)	2213-2031

Accès au document

10.1007/978-3-031-94231-0_2

Autres fichiers et liens

Lien vers la publication dans Scopus

Empreinte digitale

Voici les principaux termes ou expressions associés à « Impact of the Compaction and Curing on the Properties of Cement-Bitumen Treated Materials (CBTM) ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Contient cette citation

Perraton, D., Carter, A., Raschia, S., Grilli, A., Graziani, A., Pasquini, E., De Maeijer, P. K., Presti, D. L., Pasetto, M., Tebaldi, G., & Dave, E. (2025). Impact of the Compaction and Curing on the Properties of Cement-Bitumen Treated Materials (CBTM). Dans RILEM State-of-the-Art Reports (p. 5-98). (RILEM State-of-the-Art Reports; Vol 44). Springer Science and Business Media B.V.. https://doi.org/10.1007/978-3-031-94231-0_2

@inbook{e9f410e5e6ed48c78755f95159266257,

title = "Impact of the Compaction and Curing on the Properties of Cement-Bitumen Treated Materials (CBTM)",

abstract = "The present chapter provides a synthesis of the research activity of RILEM TC 264-RAP Task Group 1 (Cold Recycling). This chapter is divided into 10 sections. First, an abstract is provided. Then, a brief introduction (Sect. 2.1) on quality control of Reclaimed Asphalt (RA) followed by the research objective and the approach used for the experimental activities. The main focus is on a better understanding of the impact of different aspects related to cold recycled material (CRM) mix design on their properties. The following section is dedicated to a literature review of the work done on CRM around the world, which is focused on the definition of CRM, on the mix design and on the laboratory procedures. Section 2.4 highlights the concepts of the volumetric approach applied to CRM while Sects. 2.5 and 2.6 report the experimental work results and the performed analysis with a qualitatively and quantitatively discussion on the outcomes. The conclusions of the research effort are finally summarized afterwards. Overall, the experimental activity and the analysis performed to support the idea of a volumetric approach proposed by Task Group 1 to quantify constituent proportions of the CRM based on the same concept already used for hot-mix asphalt (HMA) mixtures.",

keywords = "Cement-Bitumen treated materials-CBTM, Cold recycling materials-CRM, Compaction, Curing, Emulsion, Foam, Reclaimed asphalt-RA, Strength and stiffness, Volumetric approach",

author = "Daniel Perraton and Alan Carter and Simone Raschia and Andrea Grilli and Andrea Graziani and Emiliano Pasquini and \{De Maeijer\}, \{Patricia Kara\} and Presti, \{Davide Lo\} and Marco Pasetto and Gabriele Tebaldi and Eshan Dave",

note = "Publisher Copyright: {\textcopyright} RILEM 2025.",

year = "2025",

doi = "10.1007/978-3-031-94231-0\_2",

language = "English",

series = "RILEM State-of-the-Art Reports",

publisher = "Springer Science and Business Media B.V.",

pages = "5--98",

booktitle = "RILEM State-of-the-Art Reports",

}

Perraton, D , Carter, A, Raschia, S, Grilli, A, Graziani, A, Pasquini, E, De Maeijer, PK, Presti, DL, Pasetto, M, Tebaldi, G & Dave, E 2025, Impact of the Compaction and Curing on the Properties of Cement-Bitumen Treated Materials (CBTM). Dans RILEM State-of-the-Art Reports. RILEM State-of-the-Art Reports, VOL. 44, Springer Science and Business Media B.V., p. 5-98. https://doi.org/10.1007/978-3-031-94231-0_2

Impact of the Compaction and Curing on the Properties of Cement-Bitumen Treated Materials (CBTM). / Perraton, Daniel ; Carter, Alan; Raschia, Simone et al.
RILEM State-of-the-Art Reports. Springer Science and Business Media B.V., 2025. p. 5-98 (RILEM State-of-the-Art Reports; Vol 44).

Résultats de recherche: Chapitre dans un livre, rapport, actes de conférence › Chapitre de livre › Revue par des pairs

TY - CHAP

T1 - Impact of the Compaction and Curing on the Properties of Cement-Bitumen Treated Materials (CBTM)

AU - Perraton, Daniel

AU - Carter, Alan

AU - Raschia, Simone

AU - Grilli, Andrea

AU - Graziani, Andrea

AU - Pasquini, Emiliano

AU - De Maeijer, Patricia Kara

AU - Presti, Davide Lo

AU - Pasetto, Marco

AU - Tebaldi, Gabriele

AU - Dave, Eshan

N1 - Publisher Copyright: © RILEM 2025.

PY - 2025

Y1 - 2025

N2 - The present chapter provides a synthesis of the research activity of RILEM TC 264-RAP Task Group 1 (Cold Recycling). This chapter is divided into 10 sections. First, an abstract is provided. Then, a brief introduction (Sect. 2.1) on quality control of Reclaimed Asphalt (RA) followed by the research objective and the approach used for the experimental activities. The main focus is on a better understanding of the impact of different aspects related to cold recycled material (CRM) mix design on their properties. The following section is dedicated to a literature review of the work done on CRM around the world, which is focused on the definition of CRM, on the mix design and on the laboratory procedures. Section 2.4 highlights the concepts of the volumetric approach applied to CRM while Sects. 2.5 and 2.6 report the experimental work results and the performed analysis with a qualitatively and quantitatively discussion on the outcomes. The conclusions of the research effort are finally summarized afterwards. Overall, the experimental activity and the analysis performed to support the idea of a volumetric approach proposed by Task Group 1 to quantify constituent proportions of the CRM based on the same concept already used for hot-mix asphalt (HMA) mixtures.

AB - The present chapter provides a synthesis of the research activity of RILEM TC 264-RAP Task Group 1 (Cold Recycling). This chapter is divided into 10 sections. First, an abstract is provided. Then, a brief introduction (Sect. 2.1) on quality control of Reclaimed Asphalt (RA) followed by the research objective and the approach used for the experimental activities. The main focus is on a better understanding of the impact of different aspects related to cold recycled material (CRM) mix design on their properties. The following section is dedicated to a literature review of the work done on CRM around the world, which is focused on the definition of CRM, on the mix design and on the laboratory procedures. Section 2.4 highlights the concepts of the volumetric approach applied to CRM while Sects. 2.5 and 2.6 report the experimental work results and the performed analysis with a qualitatively and quantitatively discussion on the outcomes. The conclusions of the research effort are finally summarized afterwards. Overall, the experimental activity and the analysis performed to support the idea of a volumetric approach proposed by Task Group 1 to quantify constituent proportions of the CRM based on the same concept already used for hot-mix asphalt (HMA) mixtures.

KW - Cement-Bitumen treated materials-CBTM

KW - Cold recycling materials-CRM

KW - Compaction

KW - Curing

KW - Emulsion

KW - Foam

KW - Reclaimed asphalt-RA

KW - Strength and stiffness

KW - Volumetric approach

UR - https://www.scopus.com/pages/publications/105017990151

U2 - 10.1007/978-3-031-94231-0_2

DO - 10.1007/978-3-031-94231-0_2

M3 - Book Chapter

AN - SCOPUS:105017990151

T3 - RILEM State-of-the-Art Reports

SP - 5

EP - 98

BT - RILEM State-of-the-Art Reports

PB - Springer Science and Business Media B.V.

ER -