Skip to main navigation Skip to search Skip to main content

An intelligent icephobic coating based on encapsulated phase change materials (PCM)

  • Université du Québec à Chicoutimi

Research output: Contribution to journal › Journal Article › peer-review

38 Citations (Scopus)

Abstract

The phase change materials (PCMs) have attracted great interest for applications as smart icephobic coatings because of their capability to restore and release energy. PCMs release a large amount of energy as latent heat upon freezing, which is a stimuli-response behavior for anti-icing applications. Such materials embedded within coatings can be applied to exposed infrastructures to protect them against icing. Here, we encapsulated a mixture of PCMs in a urea–formaldehyde (UF) shell by in situ polymerization and then incorporated the microcapsules into a polydimethylsiloxane (PDMS) coating. Microcapsules 5–15 µm in diameter having a shell thickness of about 200 nm were fabricated. Investigating the chemical composition of the fabricated microcapsules confirmed that PCM material was successfully encapsulated within the UF shell. Moreover, the differential scanning calorimetry (DSC) analysis showed that the PCM preserved its phase-change characteristics when encapsulated and embedded within the matrix. Increasing the abundance of microcapsules within the coating lowered the ice nucleation temperature, verified by DSC, and increased the freezing-delay time because of PCM latent heat release. We utilized a custom-made apparatus, called micro-push-off set-up that allowed us to measure ice adhesion at the exact moment that the water droplet was completely frozen. Therefore, it was observed that the presence of the PCM microcapsules reduced ice adhesion strength, through either possible mechanism of the formation of quasi-liquid layer (QLL) or thermal expansion differences. Furthermore, lower ice adhesion resulted in reduced ice accumulation on the PCM-containing coatings, verified by the static accumulation test (SAT).

Original languageEnglish
Article number130157
JournalColloids and Surfaces A: Physicochemical and Engineering Aspects
Volume655
DOIs
Publication statusPublished - 20 Dec 2022
Externally publishedYes

Keywords

  • Ice accumulation
  • Ice adhesion
  • Icephobicity
  • Latent heat
  • Phase change materials (PCMs)
  • Smart coatings

ASJC Scopus subject areas

  • Surfaces and Interfaces
  • Physical and Theoretical Chemistry
  • Colloid and Surface Chemistry

Fingerprint

Dive into the research topics of 'An intelligent icephobic coating based on encapsulated phase change materials (PCM)'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this