Abstract
This paper describes the application of three-dimensional (3-D) flow analysis techniques to the optimization of the vanes and blades for a high-work, single-stage, compressor turbine. The turbine has a pressure ratio of 4.4, a stage loading of 2.2, and an inlet temperature sufficiently high to require stator and rotor cooling. The selection of the number of airfoils, the radial work distribution, and the section stacking are discussed. The use of a 3-D flow analysis technique to handle the resulting supersonic flow and reduce the airfoil profile and shock losses is shown to be essential for achieving the target efficiency. Detailed section design, endwall contouring, reaction, and loading distribution are used to give controlled flow acceleration and minimize shock and diffusion losses. The estimated overall turbine cooled efficiency is 0.815.
| Original language | English |
|---|---|
| Pages (from-to) | 90-96 |
| Number of pages | 7 |
| Journal | Canadian Aeronautics and Space Journal |
| Volume | 36 |
| Issue number | 2 |
| Publication status | Published - Jun 1990 |
| Externally published | Yes |
ASJC Scopus subject areas
- Aerospace Engineering
- Space and Planetary Science
Fingerprint
Dive into the research topics of 'Application of 3-D flow analysis to the design of a high work transonic turbine'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver