Skip to main navigation Skip to search Skip to main content

Applications of laser processing for sensors and actuators

  • M. Meunier
  • , R. Izquierdo
  • , B. Shen
  • , A. Lecours
  • , M. Allard
  • , A. Bergeron
  • , F. Hanus
  • , S. Boughaba
  • , D. Ivanov
  • , J. F. Currie
  • , L. Laude
  • , A. Yelon
  • Polytechnique Montréal

Research output: Contribution to journal › Conference article › peer-review

Abstract

The fabrication of sensors and actuators requires new materials with multicomponent stoichiometry as well as new three-dimensional microstructures. We present several potential applications of laser processing for the fabrication of sensors and actuators. The first example concerns gas sensors which require ionic conductor multicomponent ceramics whose stoichiometry is not maintained by conventional sputtering methods. We have successfully employed pulsed laser deposition (PLD) for producing high quality NASICON (Na SuperIonic CONductor) thin films. XPS measurements show that all elements are transferred from a target of Na1+xZr2SixP3-xO12, (where 0 < x < 3) to the substrate, and that the composition of the thin film is very close to that of the target. Electrical measurements show good ionic conductivity. Thus, these films are suitable for the fabrication of electrochemical gas sensors. Since such ceramic thin films are very sensitive to liquids, wet etching is prohibited, and patterning is done using laser ablation. For other applications, a laser micromachining technique has been developed to make tunnels and cavities in Si under SiO2 films, based on the laser-induced Cl2 etching of Si and high chlorine Si/SiO2 etch rate ratios. Tunnels with length of up to 3 mm and cavities of 100×100 μm2 were successfully fabricated in SiO2/Si bilayer samples. These are usable in microfluidic or gas pressure measurement systems.

Original languageEnglish
Pages (from-to)305-316
Number of pages12
JournalMaterials Research Society Symposium Proceedings
Volume397
Publication statusPublished - 1996
Externally publishedYes
EventProceedings of the 1995 MRS Fall Meeting - Boston, MA, USA
Duration: 26 Nov 1995 → 1 Dec 1995

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

ASJC Scopus subject areas

  • General Materials Science
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Applications of laser processing for sensors and actuators'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this