TY - GEN
T1 - Assessment and comparison of tonal noise models for counter-rotating open rotors
AU - Soulat, Laurent
AU - Kernemp, Irwin
AU - Sanjose, Marlène
AU - Moreau, Stéphane
AU - Fernando, Rasika
PY - 2013
Y1 - 2013
N2 - hybrid method combining a three-dimensional unsteady RANS simulation of a cropped CROR at approach conditions and an acoustic analogy either based on a time formulation, an advanced-time formulation of Ffowcs-Williams and Hawkings' analogy, or on a frequency formulation, an extension of Hanson' s model to non compact chord length, has shown three main sources, the impacts of the front-rotor wakes on the aft-rotor, of the front-rotor tip vortex on the aft-rotor tip, and of the front-rotor hub horse-shoe vortex on the aft-rotor foot. Consequently, this study confirms that the aft-rotor is the dominant tonal noise source and has identified another potential noise source when the CROR is installed caused by the strong tip vortex of the highly-loaded clipped aft-rotor. The rotor-rotor distance should not be reduced as the potential effect is already felt on the front rotor. The influence of several numerical parameters including grid refinement, data sampling and simulation length has been evaluated on both aerodynamic and acoustic performances.
AB - hybrid method combining a three-dimensional unsteady RANS simulation of a cropped CROR at approach conditions and an acoustic analogy either based on a time formulation, an advanced-time formulation of Ffowcs-Williams and Hawkings' analogy, or on a frequency formulation, an extension of Hanson' s model to non compact chord length, has shown three main sources, the impacts of the front-rotor wakes on the aft-rotor, of the front-rotor tip vortex on the aft-rotor tip, and of the front-rotor hub horse-shoe vortex on the aft-rotor foot. Consequently, this study confirms that the aft-rotor is the dominant tonal noise source and has identified another potential noise source when the CROR is installed caused by the strong tip vortex of the highly-loaded clipped aft-rotor. The rotor-rotor distance should not be reduced as the potential effect is already felt on the front rotor. The influence of several numerical parameters including grid refinement, data sampling and simulation length has been evaluated on both aerodynamic and acoustic performances.
UR - https://www.scopus.com/pages/publications/84883714910
M3 - Contribution to conference proceedings
AN - SCOPUS:84883714910
SN - 9781624102134
T3 - 19th AIAA/CEAS Aeroacoustics Conference
SP - 193
BT - 19th AIAA/CEAS Aeroacoustics Conference
T2 - 19th AIAA/CEAS Aeroacoustics Conference
Y2 - 27 May 2013 through 29 May 2013
ER -