Skip to main navigation Skip to search Skip to main content

Balancing antifouling and corrosion resistance in cold-sprayed Cantor alloy–Cu mixed-metal coatings: The role of composition and micro-galvanic dissolution

  • Maryam Ettelaei
  • , Mohammadreza Rahimi
  • , Xueyan Xue
  • , Evan P. Connors
  • , Erika Mershrod
  • , Sima A. Alidokht
  • Memorial University of Newfoundland

Research output: Contribution to journal › Journal Article › peer-review

Abstract

The equiatomic CoCrFeMnNi high-entropy alloy (Cantor alloy) combines mechanical strength, ductility, and corrosion resistance. In marine environments, however, metallic components are severely affected by biofouling, and although copper is widely used for its antifouling properties, the continuous release of Cu ions into seawater has raised environmental concerns. Therefore, this work focuses on designing Cantor alloy–Cu mixed-metal coatings to achieve a balanced combination of antifouling performance and corrosion resistance. Cantor alloy, Cu and mixed-metal coatings containing 20 and 63 vol% Cu were deposited onto mild steel by high-pressure cold spray and characterized by SEM, Raman spectroscopy, SKPFM, potentiodynamic polarization, electrochemical impedance spectroscopy and antibacterial testing against Bacillus subtilis. SKPFM showed that the Cantor alloy regions exhibit higher Volta potentials than the Cu regions, indicating microscale galvanic couples where Cu acts as the anode. The water contact angle increased from 65.1° to 110.7°, corresponding to a transition from a hydrophilic to a hydrophobic surface. Electrochemical tests revealed a clear trade-off between passive film stability and Cu dissolution rate: increasing Cu content shifted Ecorr in a more noble direction but increased icorr and lowered Rct, and the corrosion rate increased from (1.08 ± 0.09) × 10-2 to (4.10 ± 0.33) × 10-1 mm/year. The antibacterial rate increased from 57.45 % for the Cantor alloy to 95.62 %, 97.72 % and 100 % for the 20 vol% Cu, 63 vol% Cu and pure Cu coatings. Overall, increasing the Cu content enhances the short-term antibacterial performance but reduces the corrosion resistance. Among the investigated coatings, the Cantor alloy–20 vol% Cu coating provides the best balance between antibacterial activity and corrosion resistance.

Original languageEnglish
Article number133965
JournalSurface and Coatings Technology
Volume539
DOIs
Publication statusPublished - 1 Nov 2026
Externally publishedYes

Keywords

  • Cantor alloy-Cu coating
  • Coating composition
  • Cold spray
  • Micro-galvanic dissolution
  • Microstructure

ASJC Scopus subject areas

  • General Chemistry
  • Condensed Matter Physics
  • Surfaces and Interfaces
  • Surfaces, Coatings and Films
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Balancing antifouling and corrosion resistance in cold-sprayed Cantor alloy–Cu mixed-metal coatings: The role of composition and micro-galvanic dissolution'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this