Skip to main navigation Skip to search Skip to main content

Cast joining of cast iron to aluminium casting matrix

  • McGill University
  • Concordia University

Research output: Contribution to journal › Journal Article › peer-review

10 Citations (Scopus)

Abstract

The present study focused on reinforcing Al-Si-Cu alloy with a cast iron insert and using Zn-xAl-3Si-0.5Mg (wt-%) intermediate alloys by the cast joining technique to take advantage of lightness and stiffness of the hybrid structure. The experimental set-up consisted of coating the insert using hot dipping method followed by immersing the coated insert into the Al melt and allowing the system to cool down to the room temperature. The quality of Al-Fe joints in terms of morphology, thickness, chemistry and microhardness was evaluated as a function of coating composition and immersion time in the Al melt. Characteristics of reaction layer at the coating/insert interface and its effects on the joint properties were determined using microstructural analysis and thermodynamic calculations. Combination of a suitable coating containing 27 wt-%Al and optimised process parameters, including 1 min immersion time, resulted in the formation of an Al- Fe joint with promising characteristics.

Original languageEnglish
Pages (from-to)1707-1717
Number of pages11
JournalMaterials Science and Technology
Volume27
Issue number11
DOIs
Publication statusPublished - Nov 2011
Externally publishedYes

Keywords

  • Al casting matrix
  • Cast iron insert
  • Cast joining
  • Thermodynamic analysis
  • Zn based coating

ASJC Scopus subject areas

  • General Materials Science
  • Condensed Matter Physics
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Cast joining of cast iron to aluminium casting matrix'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this