Skip to main navigation Skip to search Skip to main content

Conduction angle control strategy of a series resonant converter-static and dynamic analysis

  • Université du Québec en Abitibi-Témiscamingue

Research output: Contribution to conference types › Conference Paper › peer-review

Abstract

The dc to dc converter under, study in this paper makes use of a Series Resonant Converter (SRC) in a bridge configuration comprising four dual thyristors. A dual thyristor is realized using a bipolar transistor with suitable base drive logic and an antiparallel-connected diode. In order to obtain a regulated dc output, the SRC is usually operated using a variable frequency control strategy. This control strategy is the most commonly used one for the control of SRC, since the implementation of this strategy is very simple. However, the dynamic performance characteristics of the SRC are not very good particularly for large output voltage variations. Usually, due to self-protective features of the dual thyristors, the devices remain permanently in blocked state should there be sudden transients in the load circuit. In order to improve the dynamic characteristics of the SRC, another control strategy can be envisaged in which the conduction angle for the transistor devices is kept constant. The purpose of this paper is to establish the operating characteristics of the dc to dc converter under the mode of constant conduction angle control and to provide guidelines for the choice of the circuit parameters of the converter circuit. A laboratory bread-board of a converter of 1 kW capacity has been developed in order to validate the theoretical predictions. A number of normalized static characteristics of the converter under constant transistor conduction angle control are given in the paper. Further, theoretical characteristics have been verified by experimental results. Typical dynamic characteristics for the experimental circuit are also obtained which show improved dynamic performance under sudden transients.

Original languageEnglish
Pages640-645
Number of pages6
DOIs
Publication statusPublished - 1988
Externally publishedYes
Event1988 International Conference on Industrial Electronics: Power Electronics, IECON 1988 - Singapore, Singapore
Duration: 24 Oct 1988 → 28 Oct 1988

Conference

Conference1988 International Conference on Industrial Electronics: Power Electronics, IECON 1988
Country/TerritorySingapore
CitySingapore
Period24/10/88 → 28/10/88

Keywords

  • Conduction angle
  • DC to DC converter
  • Dual thyristor
  • Dynamic performance
  • Series Resonant Converter
  • Small signal analysis
  • Static characteristics

ASJC Scopus subject areas

  • Software
  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering
  • Control and Optimization
  • Artificial Intelligence
  • Computer Graphics and Computer-Aided Design
  • Computer Science Applications
  • Computer Vision and Pattern Recognition

Fingerprint

Dive into the research topics of 'Conduction angle control strategy of a series resonant converter-static and dynamic analysis'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this