Skip to main navigation Skip to search Skip to main content

Cooling Performance of Additively Manufactured Pin Fins in Stacked Microchannels for the Inside-Out Ceramic Turbine Shroud-Cooling Ring

  • Patrick K. Dubois
  • , Alexandre Landry-Blais
  • , Rym Gazzah
  • , Sani Sivić
  • , Vladimir Brailovski
  • , Mathieu Picard
  • Université de Sherbrooke

Research output: Contribution to journal › Journal Article › peer-review

2 Citations (Scopus)

Abstract

The inside-out ceramic turbine (ICT), a novel microturbine rotor architecture, has an air-cooled ring, which keeps its composite rotating structural shroud within operating temperature. The cooling ring must achieve a significant radial temperature gradient with a minimal amount of cooling. The cooling ring is made through additive manufacturing, which opens the design space to tailored cooling geometries. Additively manufactured pin fin heat transfer enhancers are explored in this study to assess whether they hold any significant performance benefit over current rectangular cross section open channels. Experimental friction factors and Nusselt numbers were determined for small, densely-packed pin fins over an asymmetrical thermal load. Results indicate that pressure loss is similar to what can be expected for additively manufactured pin fins, whereas heat transfer is lower due to the extremely tight streamwise pin spacing, in both in-line and staggered pin configurations. A design study presented in this article suggests that pin fins are beneficial to an ICT for reducing cooling mass flowrate up to 40%, against an increase in cooling ring mass of roughly 50%.

Original languageEnglish
Article number071004
JournalJournal of Turbomachinery
Volume144
Issue number7
DOIs
Publication statusPublished - Jul 2022

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

Keywords

  • fluid dynamics and heat transfer phenomena in compressor and turbine components of gas turbine engines

ASJC Scopus subject areas

  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Cooling Performance of Additively Manufactured Pin Fins in Stacked Microchannels for the Inside-Out Ceramic Turbine Shroud-Cooling Ring'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this