Skip to main navigation Skip to search Skip to main content

Current leakage prevention in resistance welding of carbon fibre reinforced thermoplastics

  • M. Dubé
  • , P. Hubert
  • , A. Yousefpour
  • , J. Denault
  • McGill University
  • National Research Council of Canada

Research output: Contribution to journal › Journal Article › peer-review

47 Citations (Scopus)

Abstract

Current leakage is a concern with resistance welding of carbon fibre reinforced thermoplastic composites. This phenomenon is particularly important when unidirectional adherends, with the carbon fibres parallel to the electrical current direction, are welded. In this investigation, a new electrically-insulated heating element consisting of a ceramic-coated (TiO2) stainless steel mesh was developed to prevent current leakage. Special specimen geometry, called a skin/stringer configuration, was welded with this newly developed heating element to represent typical reinforced aerospace structures. The adherends were made of APC-2/AS4 (carbon fibre/PEEK) composites. Unidirectional specimens, which represent the most critical case, were first welded using the new heating element. The insulated heating element successfully prevented current leakage and showed great improvement in temperature homogeneity over the weld area. The impact of the new heating element on the mechanical performance of the welds was then assessed by welding quasi-isotropic specimens. The mechanical performances of quasi-isotropic specimens welded using the new insulated heating elements and conventional (non-insulated) ones were compared under short beam and three-point bending tests. No mechanical performance drawback was observed with the new heating element; however, the failure mode of the welded quasi-isotropic specimens was changed from a delamination in the skin laminate failure to a weld interface debonding failure.

Original languageEnglish
Pages (from-to)1579-1587
Number of pages9
JournalComposites Science and Technology
Volume68
Issue number6
DOIs
Publication statusPublished - May 2008
Externally publishedYes

Keywords

  • A. Coating
  • A. Polymer-matrix composites (PMCs)
  • Current leakage
  • E. Welding/joining
  • Resistance welding

ASJC Scopus subject areas

  • Ceramics and Composites
  • General Engineering

Fingerprint

Dive into the research topics of 'Current leakage prevention in resistance welding of carbon fibre reinforced thermoplastics'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this