Skip to main navigation Skip to search Skip to main content

Design, manufacture and tensile properties of stochastic porous metallic structures

  • École de technologie supérieure

Research output: Contribution to journal › Journal Article › peer-review

26 Citations (Scopus)

Abstract

An original methodology was proposed to design, manufacture and test stochastic porous open-cell structures for medical applications. The first phase of the design procedure consisted in the numerical determination of the minimum representative size of the porous gauge section of testing specimens. Next, porosity gradients between the porous gauge section and the fully dense grip extremities of the specimens were created. The tensile specimens with porosities of 0.30, 0.40 and 0.50 were then produced using cobalt-chromium alloy powders and the Selective Laser Melting (SLM) technology. Finally, the specimens were subjected to uniaxial tension to failure to allow the determination of their stiffness and mechanical strength. The elastic response of these specimens in the central gauge section and the porosity gradient zones were in line with our numerical predictions and the literature data.

Original languageEnglish
Pages (from-to)26-37
Number of pages12
JournalMechanics of Materials
Volume94
DOIs
Publication statusPublished - 1 Mar 2016

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

!!!Keywords

  • Additive manufacturing
  • Finite Element Analysis
  • Medical applications
  • Porosity gradient
  • Representative Volume Element
  • Stochastic porous open-cell structures

Fingerprint

Dive into the research topics of 'Design, manufacture and tensile properties of stochastic porous metallic structures'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this