TY - GEN
T1 - Effect of dislocation substructure and grain structure of B2-austenite on martensite lattice parameters and transformation lattice strain in binary Ti-Ni alloys
AU - Prokoshkin, S. D.
AU - Korotitskiy, A. V.
AU - Brailovski, V.
AU - Inaekyan, K. E.
PY - 2008
Y1 - 2008
N2 - The Ti-50.26 and 50.61 at.%Ni alloys were cold-rolled with true strains e=0.3 to 2.1. Post-deformation annealings in the range 200 to 500°C after a moderate deformation (e=0.3) produced a polygonized dislocation substructure with various dislocation density and subgrain sizes, while after severe plastic deformation (e=1.7-1.9), a nanocrystalline structure with various grain sizes formed in the B2-austenite.The X-ray diffraction study shows that lattice parameters of B19'-martensite formed from partially recovered and polygonized or nanocrystalline austenites differ from the corresponding parameters of the martensite formed from quenched (recrystallized) austenite. This difference increases with nanocrystalline grain refinement and with increase in the residual dislocation density and subgrain refinement. The maximum martensitic transformation strain has the highest value for the martensite formed in recrystallized austenite, and this value decreases with nanogram refinement and increase in dislocation density and subgrain refinement.
AB - The Ti-50.26 and 50.61 at.%Ni alloys were cold-rolled with true strains e=0.3 to 2.1. Post-deformation annealings in the range 200 to 500°C after a moderate deformation (e=0.3) produced a polygonized dislocation substructure with various dislocation density and subgrain sizes, while after severe plastic deformation (e=1.7-1.9), a nanocrystalline structure with various grain sizes formed in the B2-austenite.The X-ray diffraction study shows that lattice parameters of B19'-martensite formed from partially recovered and polygonized or nanocrystalline austenites differ from the corresponding parameters of the martensite formed from quenched (recrystallized) austenite. This difference increases with nanocrystalline grain refinement and with increase in the residual dislocation density and subgrain refinement. The maximum martensitic transformation strain has the highest value for the martensite formed in recrystallized austenite, and this value decreases with nanogram refinement and increase in dislocation density and subgrain refinement.
UR - https://www.scopus.com/pages/publications/65649101270
U2 - 10.1361/cp2007smst063
DO - 10.1361/cp2007smst063
M3 - Contribution to conference proceedings
AN - SCOPUS:65649101270
SN - 9780871707222
T3 - SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies
SP - 63
EP - 70
BT - SMST-2007 - Proceedings of the International Conference on Shape Memory and Superelastic Technologies
T2 - International Conference on Shape Memory and Superelastic Technologies, SMST-2007
Y2 - 2 December 2007 through 5 December 2007
ER -