Skip to main navigation Skip to search Skip to main content

Elasto-geometrical calibration of an industrial robot under multidirectional external loads using a laser tracker

  • École de technologie supérieure

Research output: Contribution to Book/Report types › Contribution to conference proceedings › peer-review

64 Citations (Scopus)

Abstract

This paper presents an elasto-geometrical calibration method for improving the position accuracy of an industrial robot (ABB IRB 1600). Geometric parameter errors and joint stiffness parameters are identified through measuring the position of the robot's end-effector in several robot configurations using a laser tracker. Contrary to previous works, robot's position errors are measured under a wide range of external forces and torques for each robot configuration. A 6-DOF cable-driven parallel robot is employed to automatically apply the desired load on the end-effector of the ABB robot. Before the experiment, an observability analysis is performed in order to improve the robustness of the calibration process with respect to measurement noise and unmodeled errors. Accordingly, an optimal set of robot configurations and external loads is selected for the calibration process. The measured position errors of the ABB robot for this selected set are used to identify the real robot's elasto-geometrical parameters. Finally, the calibration efficiency is evaluated for a number of random combinations of robot configurations and external loads. The experimental results revealed that the proposed elasto-geometrical calibration approach is able to reduce the maximum position error to 0.960 mm, while a customary kinematic calibration can reduce the maximum position error only to 2.571 mm.

Original languageEnglish
Title of host publication2016 IEEE International Conference on Robotics and Automation, ICRA 2016
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages4320-4327
Number of pages8
ISBN (Electronic)9781467380263
DOIs
Publication statusPublished - 8 Jun 2016
Event2016 IEEE International Conference on Robotics and Automation, ICRA 2016 - Stockholm, Sweden
Duration: 16 May 2016 → 21 May 2016

Publication series

NameProceedings - IEEE International Conference on Robotics and Automation
Volume2016-June
ISSN (Print)1050-4729

Conference

Conference2016 IEEE International Conference on Robotics and Automation, ICRA 2016
Country/TerritorySweden
CityStockholm
Period16/05/16 → 21/05/16

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

ASJC Scopus subject areas

  • Software
  • Control and Systems Engineering
  • Artificial Intelligence
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Elasto-geometrical calibration of an industrial robot under multidirectional external loads using a laser tracker'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this