Skip to main navigation Skip to search Skip to main content

Experimental characterisation of textile compaction response: A benchmark exercise

  • A. X.H. Yong
  • , A. Aktas
  • , D. May
  • , A. Endruweit
  • , S. V. Lomov
  • , S. Advani
  • , P. Hubert
  • , S. G. Abaimov
  • , D. Abliz
  • , I. Akhatov
  • , M. A. Ali
  • , S. Allaoui
  • , T. Allen
  • , D. C. Berg
  • , S. Bickerton
  • , B. Caglar
  • , P. Causse
  • , A. Chiminelli
  • , S. Comas-Cardona
  • , M. Danzi
  • J. Dittmann, C. Dransfeld, P. Ermanni, E. Fauster, A. George, J. Gillibert, Q. Govignon, R. Graupner, V. Grishaev, A. Guilloux, M. A. Kabachi, A. Keller, K. Kind, D. Large, M. Laspalas, O. V. Lebedev, M. Lizaranzu, A. C. Long, C. López, K. Masania, V. Michaud, P. Middendorf, P. Mitschang, S. van Oosterom, R. Schubnel, N. Sharp, P. Sousa, F. Trochu, R. Umer, J. Valette, J. H. Wang
  • National Physical Laboratory
  • Institut für Verbundwerkstoffe GmbH
  • University of Nottingham
  • KU Leuven
  • Skolkovo Institute of Science and Technology
  • University of Delaware
  • McGill University
  • Clausthal University of Technology
  • Khalifa University of Science and Technology
  • Université d'Orléans
  • The University of Auckland
  • Swiss Federal Institute of Technology Lausanne
  • Polytechnique Montréal
  • Instituto Tecnologico de Aragon
  • Nantes Université
  • Swiss Federal Institute of Technology Zurich
  • University of Stuttgart
  • University of Applied Sciences Northwestern Switzerland
  • University of Leoben
  • Brigham Young University
  • IMT Mines Albi
  • Fraunhofer Research Institution for Casting, Composite and Processing Technology
  • TENSYL SARL
  • Technical University of Munich
  • Institut de Soudure Groupe
  • Purdue University
  • Wuhan University of Technology

Research output: Contribution to journal › Journal Article › peer-review

56 Citations (Scopus)

Abstract

This paper reports the results of an international benchmark exercise on the measurement of fibre bed compaction behaviour. The aim was to identify aspects of the test method critical to obtain reliable results and to arrive at a recommended test procedure for fibre bed compaction measurements. A glass fibre 2/2 twill weave and a biaxial (±45°) glass fibre non-crimp fabric (NCF) were tested in dry and wet conditions. All participants used the same testing procedure but were allowed to use the testing frame, the fixture and sample geometry of their choice. The results showed a large scatter in the maximum compaction stress between participants at the given target thickness, with coefficients of variation ranging from 38% to 58%. Statistical analysis of data indicated that wetting of the specimen significantly affected the scatter in results for the woven fabric, but not for the NCF. This is related to the fibre mobility in the architectures in both fabrics. As isolating the effect of other test parameters on the results was not possible, no statistically significant effect of other test parameters could be proven. The high sensitivity of the recorded compaction pressure near the minimum specimen thickness to changes in specimen thickness suggests that small uncertainties in thickness can result in large variations in the maximum value of the compaction stress. Hence, it is suspected that the thickness measurement technique used may have an effect on the scatter.

Original languageEnglish
Article number106243
JournalComposites Part A: Applied Science and Manufacturing
Volume142
DOIs
Publication statusPublished - Mar 2021
Externally publishedYes

!!!Keywords

  • A. Fabric/textiles
  • Compressibility
  • D. Mechanical testing

Fingerprint

Dive into the research topics of 'Experimental characterisation of textile compaction response: A benchmark exercise'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this