Skip to main navigation Skip to search Skip to main content

High cycle fatigue behavior of hard turned 300 M ultra-high strength steel

  • J. Ajaja
  • , W. Jomaa
  • , P. Bocher
  • , R. R. Chromik
  • , M. Brochu
  • Polytechnique Montréal
  • École de technologie supérieure
  • McGill University

Research output: Contribution to journal › Journal Article › peer-review

26 Citations (Scopus)

Abstract

Although the effects of hard turning on surface integrity have been extensively studied over the past decades, the fatigue behavior of hard turned ultra-high strength steels is still not completely understood. This study investigated the influence of surface integrity characteristics generated by hard turning on the rotating bending fatigue life of 55 HRC 300 M steel. Four finish cutting conditions were used to generate different combinations of surface integrity characteristics. Resulting fatigue lives ranged between 1.01∙105 and 9.84∙106 cycles for a stress amplitude of 965 MPa. A single distribution was able to fit the entire fatigue life data showing that the finish hard turning conditions evaluated are comparable. A fractographic analysis showed that specimens failed under two different crack initiation mechanisms: surface feed marks and subsurface Al2O3∙CaO∙MgO inclusions. Murakami's Kmax equation for surface defects underestimates the severity of machined surfaces and cannot explain the competition between the two crack initiation mechanisms.

Original languageEnglish
Article number105380
JournalInternational Journal of Fatigue
Volume131
DOIs
Publication statusPublished - Feb 2020

!!!Keywords

  • 300M steel
  • Crack initiation
  • Fatigue
  • Hard turning
  • Surface integrity

Fingerprint

Dive into the research topics of 'High cycle fatigue behavior of hard turned 300 M ultra-high strength steel'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this