Skip to main navigation Skip to search Skip to main content

Icephobicity and electrical assessment of slippery coating impregnated with a stabilized hydroxyl-terminated lubricant for high voltage insulation application

  • Université du Québec à Chicoutimi

Research output: Contribution to journal › Journal Article › peer-review

6 Citations (Scopus)

Abstract

In cold climate conditions, insulators are subjected to ice accretion that could affect their electrical performance and consequently lead to power outages. Besides icing, other outdoor factors, such as UV, rain, and pollution, could influence their electrical insulation efficiency. Slippery liquid-infused coatings have attracted great attention due to their icephobic applications. However, the problems caused by lubricant depletion could restrict their service time and thus limit their applications. Here, lubricant-loaded carrier (LLC) powders were first obtained by applying negative pressure through a three-step procedure. Then, hydroxyl-terminated silicone oil carriers were impregnated into a blend of polydimethylsiloxane (PDMS) and alkoxy-siloxane resin. The fabricated coatings exhibited long-lasting icephobic characteristics, resulting in reduced amount of ice accumulated on the surfaces. This reduction in ice adhesion is related not only to the slippery behavior of the coatings but also the formation of unfrozen hydrogen-bonded molecules. The coatings exhibited desired stability against weathering conditions, such as UV exposure and humidity. The electrical characteristics of the prepared coatings were evaluated using dielectric spectroscopy, flashover, condensation, and inclined plane tests. Accordingly, the coatings containing lubricant-loaded carriers showed increased flashover voltage in dry, wet, and polluted states and reduced leakage currents in the condensation test. Graphical abstract: [Figure not available: see fulltext.]

Original languageEnglish
Pages (from-to)9264-9281
Number of pages18
JournalJournal of Materials Science
Volume58
Issue number22
DOIs
Publication statusPublished - Jun 2023
Externally publishedYes

ASJC Scopus subject areas

  • Ceramics and Composites
  • Materials Science (miscellaneous)
  • General Materials Science
  • Mechanics of Materials
  • Mechanical Engineering
  • Polymers and Plastics

Fingerprint

Dive into the research topics of 'Icephobicity and electrical assessment of slippery coating impregnated with a stabilized hydroxyl-terminated lubricant for high voltage insulation application'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this