Skip to main navigation Skip to search Skip to main content

Incorporation of plasticizers in sugarcane-based poly(3-hydroxybutyrate)(PHB): Changes in microstructure and properties through ageing and annealing

  • École de technologie supérieure
  • Université de Lyon
  • CNRS UMR 5510

Research output: Contribution to journal › Journal Article › peer-review

58 Citations (Scopus)

Abstract

Poly(3-hydroxybutyrate)(PHB), a natural polymer produced by bacteria via crop-based manufacturing, presents interesting characteristics like thermoplastic behaviour and biodegradability. However, its peculiar fine lamellar structure is highly susceptible to an intrinsic ageing phenomenon that contributes to a remarkable brittleness and low toughness. It has been shown that an annealing treatment can be used to increase toughness and avoid ageing for some PHB-based materials. The incorporation of plasticizers can be another alternative to increase toughness in brittle polymers. In this work, three industrial plasticizers, tri(ethylene glycol) bis(2-ethylhexanoate)(TEG-EH), triethyl citrate (TEC) and tributyl citrate (TBC), were incorporated in PHB via melt-mixing and the effect of these additives through ageing and after annealing was investigated. TEC and TBC were also added to a reactive blend of PHB/PEMGMA. All the compositions studied had 10. wt% of plasticizer. Samples were characterized by differential scanning calorimetry, small angle X-ray scattering, scanning electron microscopy, tensile and impact testing and dynamic mechanical analysis. The compositions with plasticizers presented poor mechanical performance even though they were less affected by ageing. Annealing the samples deteriorated even further their mechanical properties due to plasticizer migration out of the interlamellar amorphous regions.

Original languageEnglish
Pages (from-to)166-174
Number of pages9
JournalIndustrial Crops and Products
Volume72
DOIs
Publication statusPublished - 5 Oct 2015

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

Keywords

  • Ageing
  • PHB
  • Plasticizer
  • Poly(3-hydroxybutyrate)
  • Semicrystalline polymers

ASJC Scopus subject areas

  • Agronomy and Crop Science

Fingerprint

Dive into the research topics of 'Incorporation of plasticizers in sugarcane-based poly(3-hydroxybutyrate)(PHB): Changes in microstructure and properties through ageing and annealing'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this