Skip to main navigation Skip to search Skip to main content

Laser powder bed fusion of a thermoplastic polyurethane: powder aging across successive build cycles

  • École de technologie supérieure

Research output: Contribution to journal › Journal Article › peer-review

Abstract

Powder recycling in laser powder bed fusion (PBF-LB) of thermoplastic polyurethane (TPU) offers economic and environmental benefits, but introduces challenges related to thermal aging and its impact on part quality. This study presents a comprehensive evaluation of TPU 1301 powder degradation across successive build cycles without refresh, and integrates morphological, rheological, thermal, and mechanical analyses to establish a coherent qualitative framework for understanding the reduced consolidation quality and mechanical performance observed in parts produced from aged powder. In the present work, aging across 8 build cycles led to a 17.5% increase in median particle size (D50), a 22% decrease in bulk powder density (BD), and a 35% increase in particle cohesion. A thermal analysis revealed a 14% increase in crystallinity and a 28% decrease in the melt flow rate (MFR), the latter indicating a reduced molecular weight and increased chain mobility. These changes directly affected the quality of built parts, which saw a 12% density decrease and a 38% surface roughness increase. Mechanical tests also manifested a 15% decrease in Shore A hardness and 26–30% drop in quasi-static tensile and compression resistance, while dynamic impact testing revealed sharper acceleration peaks and shorter time-to-peak values, indicating a decrease in the energy absorption capacity. These findings establish a direct link between powder aging and part performance in PBF-LB elastomers. They highlight the need for integrated powder‑ and part‑level quality control strategies, particularly for elastomeric lattices where consolidation quality and surface integrity critically influence the mechanical response.

Original languageEnglish
Pages (from-to)7951-7973
Number of pages23
JournalProgress in Additive Manufacturing
Volume11
Issue number8
DOIs
Publication statusPublished - Aug 2026

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

!!!Keywords

  • Additive manufacturing
  • Laser powder bed fusion
  • Polymer
  • Powder aging
  • Process control
  • TPU

Fingerprint

Dive into the research topics of 'Laser powder bed fusion of a thermoplastic polyurethane: powder aging across successive build cycles'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this