Skip to main navigation Skip to search Skip to main content

Low-frequency absorption using a two-layer system with active control of input impedance

  • CSIC - Institute for Physical and Information Technologies
  • Le Mans Université

Research output: Contribution to journal › Journal Article › peer-review

28 Citations (Scopus)

Abstract

Broadband noise absorption, including low frequencies, may be obtained by a hybrid passive-active two-layer system. A porous layer in front of an air layer provides passive absorption, at medium and high frequencies. Active control of the input impedance of the two-layer system yields absorption at low frequencies. The active control system can implement either pressure-release or impedance-matching conditions. A simple analytical model based upon plane waves propagating in a tube permits the comparison of both control strategies. The results of this simple model show that the pressure-release condition affords higher absorption than the impedance-matching condition for some combinations of geometrical and material parameters. Experimental results corroborate the good performance of the pressure-release condition under the prescribed geometrical setup.

Original languageEnglish
Pages (from-to)3211-3216
Number of pages6
JournalJournal of the Acoustical Society of America
Volume114
Issue number6 I
DOIs
Publication statusPublished - Dec 2003
Externally publishedYes

ASJC Scopus subject areas

  • Arts and Humanities (miscellaneous)
  • Acoustics and Ultrasonics

Fingerprint

Dive into the research topics of 'Low-frequency absorption using a two-layer system with active control of input impedance'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this