Skip to main navigation Skip to search Skip to main content

Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases

  • Khalifa University of Science and Technology
  • Tafila Technical University
  • Concordia University

Research output: Contribution to journal › Journal Article › peer-review

72 Citations (Scopus)

Abstract

In this work, the microstructure, texture, phases, and microhardness of 45◦ printed (with respect to the build direction) homogenized, and hot isostatically pressed (HIP) cylindrical IN718 specimens are investigated. Phase morphology, grain size, microhardness, and crystallographic texture at the bottom of each specimen differ from those of the top due to changes in cooling rate. High cooling rates during the printing process generated a columnar grain structure parallel to the building direction in the as-printed condition with a texture transition from (001) orientation at the bottom of the specimen to (111) orientation towards the specimen top based on EBSD analysis. A mixed columnar and equiaxed grain structure associated with about a 15% reduction in texture is achieved after homogenization treatment. HIP treatment caused significant grain coarsening, and engendered equiaxed grains with an average diameter of 154.8 µm. These treatments promoted the growth of δ-phase (Ni3Nb) and MC-type brittle (Ti, Nb)C carbides at grain boundaries. Laves phase (Fe2Nb) was also observed in the as-printed and homogenized specimens. Ostwald ripening of (Ti, Nb)C carbides caused excessive grain growth at the bottom of the HIPed IN718 specimens, while smaller grains were observed at their top. Microhardness in the as-fabricated specimens was 236.9 HV and increased in the homogenized specimens by 19.3% to 282.6 HV due to more even distribution of secondary precipitates, and the nucleation of smaller grains. A 36.1% reduction in microhardness to 180.5 HV was found in the HIPed condition due to γ′′ phase dissolution and differences in grain morphology.

Original languageEnglish
Article number30
JournalJournal of Manufacturing and Materials Processing
Volume2
Issue number2
DOIs
Publication statusPublished - 2018

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

!!!Keywords

  • 3D printing
  • Additive manufacturing
  • Hardness
  • Homogenization
  • Hot isostatic pressing (HIP)
  • Inconel 718
  • Microstructure
  • Precipitation
  • Selective laser melting (SLM)
  • Texture

Fingerprint

Dive into the research topics of 'Microstructural and microhardness evolution from homogenization and hot isostatic pressing on selective laser melted inconel 718: Structure, texture, and phases'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this