Skip to main navigation Skip to search Skip to main content

Modeling and simulation of stretch blow molding of polyethylene terephthalate

  • National Research Council of Canada
  • Husky Injection Molding Systems Ltd.

Research output: Contribution to journal › Journal Article › peer-review

56 Citations (Scopus)

Abstract

When polyethylene terephthalate (PET) is stretched, it exhibits strain-hardening properties, which are temperature and strain-rate dependent. In this paper, two grades of PET are experimentally characterized using biaxial tests. A visco-hyperelastic model is used to describe the stretching behavior for the polymer. A biaxial characterization method is employed to determine the model parameters using a robust nonlinear curve-fitting program. This model can represent adequately well the stretching behavior of PET. Based on this model, the membrane finite element formulation is developed to simulate the stretch blow molding process. Two bottles of different designs, produced based on the single-stage injection blow molding process, are used to validate the model. Good agreement with the bottle thickness profile is observed.

Original languageEnglish
Pages (from-to)1460-1472
Number of pages13
JournalPolymer Engineering & Science
Volume44
Issue number8
DOIs
Publication statusPublished - Aug 2004
Externally publishedYes

ASJC Scopus subject areas

  • General Chemistry
  • Polymers and Plastics
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Modeling and simulation of stretch blow molding of polyethylene terephthalate'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this