Abstract
The objectives of the present study were to characterize the distribution of residual stress and the microstructure changes induced by welding in the heat-affected zone (HAZ) of 13%Cr-4%Ni used in hydraulic turbine fabrication to deduce best practices. To characterize residual stress after welding, hole-drilling, X-ray diffraction (XRD) and the contour method were used on a FCAW 6 passes UNS W41036 (410NiMo) weld deposited on UNS S41500 (13%Cr-4%Ni) stainless steel; the results were put side to side with the weld microstructure and hardness to assess their criticality. Transverse compression was found in and around the last bead of the weld by XRD and hole-drilling. Longitudinal compression stress was found in and around the last bead while longitudinal tension was found near the low-temperature HAZ. The contour method showed that despite high compression in the last bead, high longitudinal tension exists in the rest of the weld and just below the weld. The superposition of both residual stress distribution and results from microstructural characterization shows that in multipass welding of 13%Cr-4%Ni martensitic stainless steel, cracking susceptibility is higher in the weld than in the HAZ, let it be fatigue cracking, environment-assisted cracking or cold cracking during welding. Post-weld heat treatment proved to be very efficient in lowering residual tension found in the first bead and in lowering the hardness of the weld. These results underline the importance of following proper procedures when welding these steels; this being even more true when the assembly is loaded in fatigue.
| Original language | English |
|---|---|
| Pages (from-to) | 2195-2202 |
| Number of pages | 8 |
| Journal | Journal of Materials Processing Technology |
| Volume | 209 |
| Issue number | 4 |
| DOIs | |
| Publication status | Published - 19 Feb 2009 |
UN SDGs
This output contributes to the following UN Sustainable Development Goals (SDGs)
-
SDG 7 Affordable and Clean Energy
Keywords
- Contour method
- Hole-drilling
- Martensitic stainless steel
- Residual stress
- Welding
ASJC Scopus subject areas
- Ceramics and Composites
- Computer Science Applications
- Metals and Alloys
- Industrial and Manufacturing Engineering
Fingerprint
Dive into the research topics of 'Residual stress and microstructure in welds of 13%Cr-4%Ni martensitic stainless steel'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.Cite this
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver