Skip to main navigation Skip to search Skip to main content

Self-calibrating optical 3D pose measurement device for offshore sites

  • University of Leoben

Research output: Contribution to Book/Report types › Contribution to conference proceedings › peer-review

1 Citation (Scopus)

Abstract

This paper describes a prototype system for the optical measurement of position and orientation of a specially developed target (i.e., full six degree-of-freedom measurement). The target is intended to be mounted on moveable structures, especially offshore sites influenced by the weather and sea. The system consists of the computational hardware (e.g., the camera) and software, which are required to function at at least 10 to 15 Hz. Further, a special target has been designed for the measurement, which allows for automatic calibration. The camera captures the motion of the target, and frame by frame the 3D pose of the target is reconstructed. The geometric aspects of the calibration and position and orientation measurement are also described. Finally, from test measurements, we assess the achievable measurement accuracy of the present system.

Original languageEnglish
Title of host publication2014 IEEE International Instrumentation and Measurement Technology Conference
Subtitle of host publicationInstrumentation and Measurement for Sustainable Development, I2MTC 2014 - Proceedings
PublisherInstitute of Electrical and Electronics Engineers Inc.
Pages1364-1367
Number of pages4
ISBN (Print)9781467363853
DOIs
Publication statusPublished - 2014
Externally publishedYes
Event2014 IEEE International Instrumentation and Measurement Technology Conference: Instrumentation and Measurement for Sustainable Development, I2MTC 2014 - Montevideo, Uruguay
Duration: 12 May 2014 → 15 May 2014

Publication series

NameConference Record - IEEE Instrumentation and Measurement Technology Conference
ISSN (Print)1091-5281

Conference

Conference2014 IEEE International Instrumentation and Measurement Technology Conference: Instrumentation and Measurement for Sustainable Development, I2MTC 2014
Country/TerritoryUruguay
CityMontevideo
Period12/05/14 → 15/05/14

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Self-calibrating optical 3D pose measurement device for offshore sites'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this