Skip to main navigation Skip to search Skip to main content

The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part II – Modeling

  • Georgios Pappas
  • , Simon Joncas
  • , Véronique Michaud
  • , John Botsis
  • Swiss Federal Institute of Technology Lausanne

Research output: Contribution to journal › Journal Article › peer-review

15 Citations (Scopus)

Abstract

This article reports modeling techniques and results based on experimental Mode I characterization of a layered woven GFRP material with tufting reinforcement. Standard tuft and loop-less geometries are investigated on three different areal patterns to evaluate their effects on fracture resistance. The experiments reveal that tow/ply and tuft bridging phenomena are present during delamination. The numerical modeling comprises cohesive elements for tow/ply bridging and 1D connector elements for discrete tufts. The traction separation relations for the cohesive model are acquired using an inverse scheme based on strain measurements and the force-separation relations of tuft's failure mechanisms from uniaxial pulling tests on a reference tufting pattern. Results show that tuft's failure mechanism is strongly affected by tufting pattern and geometry while tow/ply bridging contributes 20–30% of the overall fracture energy. The energy absorbed by pull-out of loop-less tufts is approximately twice the fracture energy of standard ones with pull-out triggering much more extensive tow/ply bridging phenomena.

Original languageEnglish
Pages (from-to)379-390
Number of pages12
JournalComposite Structures
Volume181
DOIs
Publication statusPublished - 1 Dec 2017

Keywords

  • Cohesive zone modeling
  • Composite materials
  • Fracture resistance
  • Through-thickness reinforcement (TTR)
  • Traction separation relations
  • Tufting

ASJC Scopus subject areas

  • Ceramics and Composites
  • Civil and Structural Engineering

Fingerprint

Dive into the research topics of 'The influence of through-thickness reinforcement geometry and pattern on delamination of fiber-reinforced composites: Part II – Modeling'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this