Skip to main navigation Skip to search Skip to main content

Triangular truss joints using rectangular tubes

  • Royal Military College of Canada
  • McGill University

Research output: Contribution to journal › Journal Article › peer-review

13 Citations (Scopus)

Abstract

This paper deals with the behavior and design of welded joints to the tension chord of triangular trusses, with two Warren-type web planes and a single tension chord, made of rectangular tubes (hollow structural sections or HSS). Experimental programs are outlined in which simplified double-T joints and triangular truss segments with double-K gap joints were tested. Parameters investigated include the gap size, the web-member-width-to-chord-width ratio, the chord -wall-width-to-thickness ratio, and the angle between web planes. The mechanics of deformations of the double-T and double-K joints are discussed in relation to yield line theory, and this theory is shown to give a good prediction of the experimental joint stiffnesses and strengths. Strength equations are proposed to cover tension chord gap joint behavior with respect to chord wall bending and a design example is outlined

Original languageEnglish
Pages (from-to)408-424
Number of pages17
JournalJournal of Structural Engineering (United States)
Volume114
Issue number2
DOIs
Publication statusPublished - Feb 1988
Externally publishedYes

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Building and Construction
  • General Materials Science
  • Mechanics of Materials
  • Mechanical Engineering

Fingerprint

Dive into the research topics of 'Triangular truss joints using rectangular tubes'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this