Skip to main navigation Skip to search Skip to main content

Ultra-thin ALD CoOx-ZnO heterogenous films as highly sensitive and environmentally friendly H2S sensor

  • Qing Min Hu
  • , Zhe Dong
  • , Gai Xia Zhang
  • , Yu Xi Li
  • , Shuang Feng Xing
  • , Zhi Heng Ma
  • , Bo Yu Dong
  • , Bo Lu
  • , Shu Hui Sun
  • , Jia Qiang Xu
  • Shanghai University
  • Institut national de la recherche scientifique
  • CAS - Institute of Coal Chemistry

Research output: Contribution to journal › Journal Article › peer-review

45 Citations (Scopus)

Abstract

To obtain environmentally friendly, integrated and miniaturized gas sensors for the increasing request for the Internet of Things industry and other relative areas, the ultra-thin CoO x/ZnO heterogeneous film with active interfacial sites was in-situ deposited on micro-electro-mechanical systems (MEMS) as H2S sensor. Atomic layer deposition (ALD) was employed to in-situ fabricate the uniform ZnO thin film. ALD CoO x was deposited on ZnO surface to obtain CoO x/ZnO heterojunction and active interfacial sites. The ultra-thin film (20 nm) with 50 ALD CoO x decorated on 250 ALD ZnO displays excellent sensing performance, including very high response (4.45@200 × 10−9) and selectivity to H2S with a limit of detection (LOD) of 0.38 × 10−9, long-term sensing stability, high response/recovery performance (7.5 s/15.7 s) and mechanical strength at 230 °C. Reasons for the high sensing performance of CoO x/ZnO have been confirmed by series of characterizations and density functional theory (DFT) calculation. Heterojunction film thickness with Debye length, the oxygen vacancies and the synergistic effect of active interfacial sites are main reasons for the high sensing performance. The strategy by fabrication of CoO x/ZnO heterogeneous film within Debye length and employing synergistic effect of active interfacial sites offers a promising route for the design of environmentally friendly gas sensors. Furthermore, the ALD technique offers a facile in-situ strategy and high-throughput fabrication of MEMS gas sensors. Graphical Abstract: [Figure not available: see fulltext.].

Original languageEnglish
Pages (from-to)3054-3063
Number of pages10
JournalRare Metals
Volume42
Issue number9
DOIs
Publication statusPublished - Sept 2023
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 9 - Industry, Innovation, and Infrastructure
    SDG 9 Industry, Innovation, and Infrastructure

Keywords

  • Atomic layer deposition (ALD)
  • CoO/ZnO active interfacial sites
  • HS gas sensor
  • Surface decoration

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Physical and Theoretical Chemistry
  • Metals and Alloys
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Ultra-thin ALD CoOx-ZnO heterogenous films as highly sensitive and environmentally friendly H2S sensor'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this