Skip to main navigation Skip to search Skip to main content

Ultrasonic monitoring of injection molding and die casting

  • Bin Cao
  • , H. Wang
  • , Cheng Kuei Jen
  • , N. T. Nguyen
  • , J. Legoux
  • , Chee A. Loong
  • , Martin Viens
  • National Research Council of Canada
  • McGill University

Research output: Contribution to journal › Conference article › peer-review

Abstract

On-line ultrasonic monitoring of polymer injection molding and aluminum die casting are presented. The flow front of molten polymer and aluminum inside the mold has been proved by a multiple-channel acquisition system with a time resolution up to 1 ms. This information may be used to control the plunger movement. The gap development, due to the shrinkage of the part in the mold, and the part solidification are also monitored for the understanding of the cooling process. As expected, it is observed that thicker sections take longer times to solidify. For injection molding, the relation between the gap formation time and packing pressure has been investigated. Since the temperature of molten aluminum is around 700 degrees C, ultrasonic waveguides are inserted into the die for the monitoring.

Original languageEnglish
Pages (from-to)173-186
Number of pages14
JournalProceedings of SPIE - The International Society for Optical Engineering
Volume2948
DOIs
Publication statusPublished - 1996
Externally publishedYes
EventNondestructive Evaluation for Process Control in Manufacturing - Scottsdale, AZ, United States
Duration: 3 Dec 1996 → 3 Dec 1996

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Computer Science Applications
  • Applied Mathematics
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'Ultrasonic monitoring of injection molding and die casting'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this