Skip to main navigation Skip to search Skip to main content

Wind turbine performance under icing conditions

  • Université du Québec à Chicoutimi
  • Université du Québec à Rimouski

Research output: Contribution to journal › Journal Article › peer-review

190 Citations (Scopus)

Abstract

The wind energy market is in full growth in Quebec but technical difficulties due to cold climate conditions have occurred for most of the existing projects. Thus, icing simulations were carried out on a 0.2 m NACA 63 415 blade profile in the refrigerated wind tunnel of the Anti-icing Materials International Laboratory (AMIL). The shapes and masses of the ice deposits were measured, as well as the lift and drag forces of the iced profiles. Scaling was carried out based on the 1.8 MW-Vestas V80 wind turbine technical data, for three different radial positions and two in-fog icing conditions measured at the Murdochville wind farm in the Gaspé Peninsula. For both icing events, the mass of ice accumulated on the blade profile increased with an increase in the radial position. In wet regime testing (first icing event), glaze formed mostly near the leading edge and on the pressure side. It also accumulated by run-off on the trailing edge of the outer half of the blade. In dry-regime testing (second icing event), rime mostly accreted on the leading edge and formed horns. For both icing events, when glaze or rime accreted on the blade profile, lift decreased and drag increased. A load calculation using the blade element theory shows that drag force on the entire blade becomes too large compared to lift, leading to a negative torque and the stop of the wind turbine. Torque reduction is more significant on the outer third of the blade. Setting up a de-icing system only on the outer part of the blade would enable significant decrease of heating energy costs.

Original languageEnglish
Pages (from-to)319-333
Number of pages15
JournalWind Energy
Volume11
Issue number4
DOIs
Publication statusPublished - 2008
Externally publishedYes

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

  1. SDG 7 - Affordable and Clean Energy
    SDG 7 Affordable and Clean Energy

Keywords

  • Aerodynamic scale
  • Drag
  • Ice accretion
  • Icing simulation
  • Lift
  • NACA 63 415 rotor blade profile
  • Power losses
  • Wind tunnel tests

ASJC Scopus subject areas

  • Renewable Energy, Sustainability and the Environment

Fingerprint

Dive into the research topics of 'Wind turbine performance under icing conditions'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this