Passer à la navigation principale Passer à la recherche Passer au contenu principal

A highly integrated 1.8 ghz frequency synthesizer based on a MEMS resonator

  • Frederic Nabki
  • , Karim Allidina
  • , Faisal Ahmad
  • , Paul Vahe Cicek
  • , Mourad N. El-Gamal
  • McGill University

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

60 Citations (Scopus)

Résumé

A highly integrated 1.7-2.0 GHz digitally programmable frequency synthesizer using a MEMS resonator as its reference is presented. Due to the dimensions of the MEMS device (e.g., 25 μm by 114 μm), the entire system with a total area of 6.25 mm2 can be housed in a small standard chip package. This considerably reduces the form factor and cost of the system, compared to using an external crystal as a reference. The MEMS resonators are clamped-clamped beams fabricated using a CMOS-compatible process. The main structural layer is made of silicon carbide, which provides the resonators with higher power handling capabilities and higher operating frequencies, compared to silicon. The resonators are electrostatically and thermally tunable - an 8.4% frequency tuning is demonstrated for a 9 MHz resonator. The 100 nm vertical transducer gaps of the resonators allow the use of electrostatic actuation voltages as low as 2 V. An integrated high gain-bandwidth trans-impedance amplifier (TIA) is combined with a resonator to generate the synthesizer's input reference signal. The TIA employs automatic gain control to mitigate the inherent low power handling capabilities and the non-linearities of the MEMS device, thus minimizing their effect on phase noise. The fractional-N synthesizer employs a 3rd-order 20-bit delta-sigma modulator to deliver a theoretical output resolution of ∼ 11 Hz, in order to allow for high output frequency stability when used with an appropriate feedback loop. A fully integrated on-chip dual path loop filter is used to maintain a high level of system integration. With a supply voltage of 2 V, the phase noise for a 1.8 GHz output frequency and a ∼ 12 MHz reference signal is - 122 dBc/Hz at a 600 kHz offset, and - 137 dBc/Hz at a 3 MHz offset.

Langue originaleAnglais
Numéro d'article5173754
Pages (de - à)2154-2168
Nombre de pages15
RevueIEEE Journal of Solid-State Circuits
Volume44
Numéro de publication8
Les DOIs
ÉtatPublié - août 2009
Modification externeOui

SDG des Nations Unies

Ce résultat contribue à ou aux Objectifs de développement durable suivants

  1. SDG 9 – Industrie, innovation et infrastructure
    SDG 9 – Industrie, innovation et infrastructure

Classification disciplinaire ASJC Scopus

  • Ingénierie électrique et électronique

Empreinte digitale

Voici les principaux termes ou expressions associés à « A highly integrated 1.8 ghz frequency synthesizer based on a MEMS resonator ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource