TY - GEN
T1 - A single stage optocoupler-less buck-boost PFC driver for LED lamp at universal AC mains
AU - Singh, Bhim
AU - Shrivastava, Ashish
AU - Chandra, Ambrish
AU - Al-Haddad, Kamal
PY - 2013
Y1 - 2013
N2 - This paper deals with a single-stage PFC (Power Factor Corrected) buck-boost converter based low power LED (Light Emitting Diode) lamp driver for general purpose lighting. In the proposed circuit, a buck-boost converter is operated in CCM (Continuous Conduction Mode) with PSCR (Primary Sensing Current Regulation) using feed forward current control scheme to improve power quality at universal AC mains. A design procedure of proposed LED driver is illustrated and its simulated performance is demonstrated for improvement in various power quality indices in Matlab/Simulink environment for a 220 V, 50 Hz input AC mains. In order to validate the design, an optocoupler-less buck-boost PFC converter based LED driver is developed with low component count and low cost and tested for a load of 13 W with multiple LEDs connected in series. Each LED has a forward voltage of 3.1 V, forward rated current of 325 mA and power rating of 1 W. The measured power quality indices are observed well within the IEC-61000-3-2 norms for class C equipments.
AB - This paper deals with a single-stage PFC (Power Factor Corrected) buck-boost converter based low power LED (Light Emitting Diode) lamp driver for general purpose lighting. In the proposed circuit, a buck-boost converter is operated in CCM (Continuous Conduction Mode) with PSCR (Primary Sensing Current Regulation) using feed forward current control scheme to improve power quality at universal AC mains. A design procedure of proposed LED driver is illustrated and its simulated performance is demonstrated for improvement in various power quality indices in Matlab/Simulink environment for a 220 V, 50 Hz input AC mains. In order to validate the design, an optocoupler-less buck-boost PFC converter based LED driver is developed with low component count and low cost and tested for a load of 13 W with multiple LEDs connected in series. Each LED has a forward voltage of 3.1 V, forward rated current of 325 mA and power rating of 1 W. The measured power quality indices are observed well within the IEC-61000-3-2 norms for class C equipments.
KW - Improved Power Quality Converter
KW - LED Lamp Driver
KW - Power Factor Correction (PFC)
KW - Primary Sensing Current Regulation (PSCR)
KW - Total Harmonic Distortion (THD)
KW - Universal AC Mains
UR - https://www.scopus.com/pages/publications/84893398695
U2 - 10.1109/IAS.2013.6682508
DO - 10.1109/IAS.2013.6682508
M3 - Contribution to conference proceedings
AN - SCOPUS:84893398695
SN - 9781467352024
T3 - Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)
BT - 2013 IEEE Industry Applications Society Annual Meeting, IAS 2013
T2 - 2013 IEEE Industry Applications Society Annual Meeting, IAS 2013
Y2 - 6 October 2013 through 11 October 2013
ER -