TY - GEN
T1 - Biofiltration of methane issued from landfills, an experimental lab-scale study
AU - Nikiema, J.
AU - Heitz, M.
PY - 2007
Y1 - 2007
N2 - The aim of the study described in this paper was to examine the influence of methane inlet load on its biofiltration and thence, to optimize the quantity of nitrogen required for the maximum performance of the bio filter. Two filter materials were tested: a) an organic compost, and b) an inorganic filtration medium. The nitrogen was provided in the form of nitrates, through additions of a nutrient solution. These experiments, being undertaken with the use of an organic bed, have made it possible to put forward the poor performance of this type of material when utilized for methane elimination. It has also been established that the use of a nitrogen concentration of ∼ 0.75 g/L leads to the largest elimination capacity at a methane inlet load of 75 g/m3/h. In the inorganic bed, the particular influences of the methane inlet load, and of the nitrogen concentration, are more evident. Indeed, increases in the methane inlet load results in increases in the elimination capacity when the nitrogen substrate is not a reaction limiting factor. Optimum nitrogen concentrations, as a function of the inlet load, have also determined, thus for a methane inlet load of 95 g/m3/h, the optimum nitrogen concentration is determined to be 0.75 g/L while for a methane inlet load of 55 g/m3/h, it is only 0.5 g/L.
AB - The aim of the study described in this paper was to examine the influence of methane inlet load on its biofiltration and thence, to optimize the quantity of nitrogen required for the maximum performance of the bio filter. Two filter materials were tested: a) an organic compost, and b) an inorganic filtration medium. The nitrogen was provided in the form of nitrates, through additions of a nutrient solution. These experiments, being undertaken with the use of an organic bed, have made it possible to put forward the poor performance of this type of material when utilized for methane elimination. It has also been established that the use of a nitrogen concentration of ∼ 0.75 g/L leads to the largest elimination capacity at a methane inlet load of 75 g/m3/h. In the inorganic bed, the particular influences of the methane inlet load, and of the nitrogen concentration, are more evident. Indeed, increases in the methane inlet load results in increases in the elimination capacity when the nitrogen substrate is not a reaction limiting factor. Optimum nitrogen concentrations, as a function of the inlet load, have also determined, thus for a methane inlet load of 95 g/m3/h, the optimum nitrogen concentration is determined to be 0.75 g/L while for a methane inlet load of 55 g/m3/h, it is only 0.5 g/L.
KW - Biofiltration
KW - Compost
KW - Inorganic material
KW - Methane
KW - Nitrates
KW - Nitrogen
UR - https://www.scopus.com/pages/publications/84933575813
M3 - Contribution to conference proceedings
AN - SCOPUS:84933575813
T3 - 100th Annual Conference and Exhibition of the Air and Waste Management Association 2007, ACE 2007
SP - 3763
EP - 3769
BT - 100th Annual Conference and Exhibition of the Air and Waste Management Association 2007, ACE 2007
PB - Air and Waste Management Association
T2 - 100th Annual Conference and Exhibition of the Air and Waste Management Association 2007, ACE 2007
Y2 - 26 June 2007 through 29 June 2007
ER -