Passer à la navigation principale Passer à la recherche Passer au contenu principal

Characteristics of a bolted joint with a shape memory alloy stud

  • École de technologie supérieure

Résultats de recherche: Chapitre dans un livre, rapport, actes de conférence › Participation à un ouvrage collectif lié à un colloque ou une conférence › Revue par des pairs

Résumé

Creep is an important factor that contributes to the load loss and tightness failure of bolted joints. Retightening of the joint can be expensive, time consuming and therefore is an undesirable solution. Currently most efforts are focussed on reducing load losses directly by tightening to yield, improving material creep properties or making joints less rigid. An alternative solution of current interest is the use of bolts in shape memory alloy (SMAs). However, very few experimental studies are available that demonstrate its feasibility. The objective of this study is to exploit the benefit of the shape memory and superelasticity behaviors of a SMA stud to recover the load losses due to creep and thermal exposure of a gasket in a bolted joint assembly. This paper explores several avenues to investigate and model the thermo-mechanical properties of a bolted joint with a Nickel-Titanium SMA stud. A stiffness-based analytical model which incorporates the Likhachev model of SMA is used as a representation of an experimental bolted joint assembly. Using this model the rigidity of the experimental setup is optimized to make the best use of the SMA properties of the stud. This theoretical model is validated by a Finite Element (FE) Model using a custom FE material model which also implements the SMA material model. Finally an experimental test bench with an optimized stiffness derived from analytical simulations is used, with and without gaskets to demonstrate the ability of the SMA stud to recover load losses.

Langue originaleAnglais
titreMaterials Characterisation V
Pages339-347
Nombre de pages9
Les DOIs
ÉtatPublié - 2011
Evénement5th International Conference on Computational Methods and Experiments in Materials Characterisation, MC11 - , Malte
Durée: 13 juil. 2011 → 15 juil. 2011

Série de publications

NomWIT Transactions on Engineering Sciences
Volume72
ISSN (imprimé)1743-3533

Conférence

Conférence5th International Conference on Computational Methods and Experiments in Materials Characterisation, MC11
Pays/TerritoireMalte
Période13/07/11 → 15/07/11

Classification disciplinaire ASJC Scopus

  • Mécanique numérique
  • Sciences générales des matériaux
  • Mécanique des matériaux
  • Flux de fluides et processus de transfert
  • Electrochimie

Empreinte digitale

Voici les principaux termes ou expressions associés à « Characteristics of a bolted joint with a shape memory alloy stud ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource