TY - GEN
T1 - Direct self-noise simulation of the installed Controlled Diffusion airfoil
AU - Sanjosé, M.
AU - Moreau, S.
AU - Kim, M. S.
AU - Pérot, F.
PY - 2011
Y1 - 2011
N2 - Broadband noise produced by the trailing-edge of a controlled diffusion (CD) airfoil is directly simulated using a Lattice-Boltzmann method (PowerFlow) that resolves both the aerodynamic and acoustic field around the airfoil. The proper DNS resolution is first achieved in the vicinity of the airfoil on a quasi-2D slice of the mock-up. It is then extended to a 3D slice with a span of 12 % chord length. Two numerical setups of the anechoic open- jet facility where both aerodynamic and acoustic data have been collected are investigated to capture the installation effects: in a first numerical setup (called free), the CD airfoil is set in an uniform flow, while in the second setup (lips) the real jet nozzle geometry is considered. While in the free-field configuration the boundary layer rapidly detaches on the suction side, in the lips the jet shear layers modify the pressure load on the airfoil and the boundary layer keeps attached in the configuration with nozzle. In both setups a laminar recirculation bubble is captured on the suction side near the leading edge which triggered the development of the boundary layers along the suction side. The wall-pressure and noise spectra for the free configuration are spread over a large frequency band and agree with similar measurements at higher angle of attack for which the flow is detached. The spectra for the lips configuration better agree with the experimental data and has been selected for the 3D simulation. The vortex stretching along the span-wise direction that was missing in the previous investigated set-ups, allows to finely capture the turbulence length scales and accurately reproduce the experimental measurements. Both the boundary layer profile and the wall pressure spectra near the trailing edge are nicely and accurately captured. The predicted far-field sound pressure levels also provide satisfactory agreement with noise measurements in the anechoic wind tunnel.
AB - Broadband noise produced by the trailing-edge of a controlled diffusion (CD) airfoil is directly simulated using a Lattice-Boltzmann method (PowerFlow) that resolves both the aerodynamic and acoustic field around the airfoil. The proper DNS resolution is first achieved in the vicinity of the airfoil on a quasi-2D slice of the mock-up. It is then extended to a 3D slice with a span of 12 % chord length. Two numerical setups of the anechoic open- jet facility where both aerodynamic and acoustic data have been collected are investigated to capture the installation effects: in a first numerical setup (called free), the CD airfoil is set in an uniform flow, while in the second setup (lips) the real jet nozzle geometry is considered. While in the free-field configuration the boundary layer rapidly detaches on the suction side, in the lips the jet shear layers modify the pressure load on the airfoil and the boundary layer keeps attached in the configuration with nozzle. In both setups a laminar recirculation bubble is captured on the suction side near the leading edge which triggered the development of the boundary layers along the suction side. The wall-pressure and noise spectra for the free configuration are spread over a large frequency band and agree with similar measurements at higher angle of attack for which the flow is detached. The spectra for the lips configuration better agree with the experimental data and has been selected for the 3D simulation. The vortex stretching along the span-wise direction that was missing in the previous investigated set-ups, allows to finely capture the turbulence length scales and accurately reproduce the experimental measurements. Both the boundary layer profile and the wall pressure spectra near the trailing edge are nicely and accurately captured. The predicted far-field sound pressure levels also provide satisfactory agreement with noise measurements in the anechoic wind tunnel.
UR - https://www.scopus.com/pages/publications/84883057278
M3 - Contribution to conference proceedings
AN - SCOPUS:84883057278
SN - 9781600869433
T3 - 17th AIAA/CEAS Aeroacoustics Conference 2011 (32nd AIAA Aeroacoustics Conference)
BT - 17th AIAA/CEAS Aeroacoustics Conference 2011 (32nd AIAA Aeroacoustics Conference)
T2 - 17th AIAA/CEAS Aeroacoustics Conference 2011 (32nd AIAA Aeroacoustics Conference)
Y2 - 5 June 2011 through 8 June 2011
ER -