Passer à la navigation principale Passer à la recherche Passer au contenu principal

Effect of mischmetal concentration and superheating on the microstructure and tensile properties A319.1: Role of Fe content

  • H. W. Doty
  • , E. Samuel
  • , A. M. Samuel
  • , E. Elsharkawi
  • , V. Songmene
  • , F. H. Samuel
  • General Motors
  • Université du Québec à Chicoutimi
  • Saint Mary's University Halifax

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

2 Citations (Scopus)

Résumé

The aim of this research is to study the effect of certain metallurgical parameters such as the addition of a mixture of rare earths (mischmetal) and superheating on the microstructure and tensile properties of the Al–Si–Cu alloy A319.2 containing 0.4%, 0.8% and 1.2% iron used in the automotive industry. The mischmetal (MM) precipitates in the form of platelets like the β-Al5FeSi leading to a marked refinement in eutectic Si particles at 5% MM. In addition, α- Al15(Fe,Mn)3Si2. segregated particles and mischmetal-bound intermetallics persist in the microstructure even after T6 heat treatment. The tensile properties of 0.8% iron alloys deteriorate when the mischmetal concentration and superheat temperature increase, although the silicon phase undergoes significant changes. Alloys with a high iron concentration (1.2% Fe) showed a slight decrease in the length of the β-Al5FeSi phase platelets and of the mischmetal compared to alloys with 0.4% and 0.8% Fe when the concentration of mischmetal increases to 5% and when the superheating temperature reaches 950 °C. This observation explains the increase in the % elongation to fracture of the 1.2% Fe-5% mischmetal alloy cast directly from 750 °C or after superheating at 950 °C, followed by in-furnace cooling to 750 °C. The ultimate tensile strength and yield strength degrade with mischmetal, but improve slightly with superheating; only for the 1.2% Fe-0% mischmetal alloy, its yield strength decreases once superheated to 950 °C.

Langue originaleAnglais
Pages (de - à)51-66
Nombre de pages16
RevueJournal of Materials Research and Technology
Volume35
Les DOIs
ÉtatPublié - 1 mars 2025

Classification disciplinaire ASJC Scopus

  • Céramiques et composites
  • Biomatériaux
  • Surfaces, revêtements et films
  • Métaux et alliages

Empreinte digitale

Voici les principaux termes ou expressions associés à « Effect of mischmetal concentration and superheating on the microstructure and tensile properties A319.1: Role of Fe content ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource