Passer à la navigation principale Passer à la recherche Passer au contenu principal

Résumé

The corrosion of flange faces poses a significant risk to the structural integrity of bolted flanged connections and can lead to severe leakage problems. It has been observed on multiple occasions that bolted flanged joints experience premature failure due to crevice corrosion on the flange faces, where the gasket is positioned, and these areas are not accessible nor visible. Crevice corrosion occurs due to the breakdown of the passive layer in an occluded area, specifically at the flange and gasket interface, greatly increasing the corrosion rate of the flange compared to general corrosion. The breakdown of the passive layer is a challenging phenomenon, occurring on a small scale and within a short period, making it difficult to detect through regular inspection methods. The propagation of crevice corrosion can be significantly influenced by working conditions. Given that the crevice geometry is one of the most influential factors in crevice corrosion, the specially designed COrrosion Quantification Test (COQT) fixture, introduced in previous papers, is utilized in this research, allowing the application of various electrochemical techniques to assess flange corrosion under a controlled environment. The primary objective of this research is to propose a methodology for measuring and comparing the crevice corrosion propagation rate of flange faces under different temperatures and fluid flow rates. The chemical composition of the flange specimens complies with ASTM A182 F321 stainless steel, while the gasket is a sheet graphite with no inhibitors. The results from potentiostatic polarization tests reveal an increase in crevice corrosion rate with elevated temperatures. Moreover, crevice corrosion rate decreases with the fluid flow rate increase. These findings highlight the influence of mass transport in controlling crevice corrosion propagation rates.

Langue originaleAnglais
titreCodes and Standards; Computer Technology and Bolted Joints
EditeurAmerican Society of Mechanical Engineers (ASME)
ISBN (Electronique)9780791888476
Les DOIs
ÉtatPublié - 2024
EvénementASME 2024 Pressure Vessels and Piping Conference, PVP 2024 - Bellevue, Etats-Unis
Durée: 28 juil. 2024 → 2 août 2024

Série de publications

NomAmerican Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP
Volume1
ISSN (imprimé)0277-027X

Conférence

ConférenceASME 2024 Pressure Vessels and Piping Conference, PVP 2024
Pays/TerritoireEtats-Unis
La villeBellevue
Période28/07/24 → 2/08/24

Classification disciplinaire ASJC Scopus

  • Ingénierie mécanique

Empreinte digitale

Voici les principaux termes ou expressions associés à « EFFECT OF TEMPERATURE ON THE CREVICE CORROSION PROPAGATION ON FLANGE FACES ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource