Résumé
The strain-rate sensitivity of coarse-grained (CG) and ultrafine-grained (UFG) Ti-50at%Ni alloys was studied in the 20-500°C temperature range. In the 10-3-10-5s-1 strain rate range, the maximum strain-rate sensitivity exponent m was measured by the strain-rate-jump test, while in the 10-5-10-6s-1 strain rate range, m was measured by the stress-jump creep test. It was determined that the smaller the initial grain/subgrain size (d), the lower the deformation temperature (Td) and the higher the strain rate (ε˙) leading to superplasticity (m=0.5): for d=250nm, Td=400°C and ε˙∈[0.4-2.5]×10-5s-1, while for d=500nm, Td=500°C and ε˙∈[0.1-3]×10-5s-1. The low-temperature deformability of the CG and UFG Ti-Ni alloys have also been compared under conditions of severe cold rolling (accumulated strain of 2) by measuring the length and concentration of the processing-induced microcracks. The results of this study showed an increase in the low-temperature deformability of UFG Ti-Ni alloy compared to CG Ti-Ni alloy.
| Langue originale | Anglais |
|---|---|
| Pages (de - à) | 21-29 |
| Nombre de pages | 9 |
| Revue | Materials Science and Engineering: A |
| Volume | 622 |
| Les DOIs | |
| État | Publié - 2 janv. 2015 |
Classification disciplinaire ASJC Scopus
- Sciences générales des matériaux
- Physique de la matière condensée
- Mécanique des matériaux
- Ingénierie mécanique
Empreinte digitale
Voici les principaux termes ou expressions associés à « Effect of the grain/subgrain size on the strain-rate sensitivity and deformability of Ti-50at%Ni alloy ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.Citer cette ressource
- APA
- Author
- BIBTEX
- Harvard
- Standard
- RIS
- Vancouver