Passer à la navigation principale Passer à la recherche Passer au contenu principal

Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation

  • École de technologie supérieure
  • Universite Toulouse III
  • National Research Council of Canada

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

57 Citations (Scopus)

Résumé

The fatigue properties of gas metal arc welded and friction stir welded assemblies made of aluminum alloy AA6061-T6 structural extrusions were examined. The mechanical performances of welded joints were obtained using uniaxial tensile and force-controlled constant amplitude axial fatigue tests. Microstructural and fractographic analyses were conducted to document the influence of the process on microstructure evolution, fatigue crack initiation sites, and propagation mechanisms leading to the final rupture of the assemblies. Microhardness measurements and digital image correlation techniques paired with interrupted tensile tests were also used to investigate the complex heterogeneous local mechanical behavior and to highlight the fact that the crack initiation mechanism was driven by the microstructural state of the joint as well as by the structural-contact-fretting occurring at the notch root. The corresponding fatigue strengths at 2 million and 10 million cycles were evaluated respectively at 10% and 20% higher for friction stir welded assemblies versus gas metal arc welded assemblies. Fractographic analyses revealed that the fatigue cracks were initiated from microstructural features (pores for the GMAW configuration and banded structure on the crown side for the FSW configuration), or from large sub-surface grains in a shallow region below the structural-contact-fretting occurring at the notch root.

Langue originaleAnglais
Pages (de - à)220-233
Nombre de pages14
RevueInternational Journal of Fatigue
Volume116
Les DOIs
ÉtatPublié - nov. 2018

Classification disciplinaire ASJC Scopus

  • Modélisation et simulation
  • Sciences générales des matériaux
  • Mécanique des matériaux
  • Ingénierie mécanique
  • Ingénierie industrielle et de fabrication

Empreinte digitale

Voici les principaux termes ou expressions associés à « Fatigue performances of FSW and GMAW aluminum alloys welded joints: Competition between microstructural and structural-contact-fretting crack initiation ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource