TY - CHAP
T1 - High-speed robotic trimming of CFRP
AU - Slamani, M.
AU - Chatelain, J. F.
N1 - Publisher Copyright:
© 2015 Walter de Gruyter GmbH, Berlin/Munich/Boston.
PY - 2015
Y1 - 2015
N2 - The demand for aircraft components with high mechanical and physical properties such as high strength, high stiffness, low weight, durability and extreme corrosion resistance has increased the popularity of CFRP. CFRP parts are usually produced by molding or near net shape processing. In some applications, however, trimming, milling and drilling are still required to bring CFRP parts to their final shapes and sizes. While the trimming of carbon fiber is generally carried out with CNC machine tools, however, the process is relatively slow due to the low flexibility ofmachine tools, their high up-front costs and their higher operating costs. Thanks to their adaptability, programmability, high dexterity and good maneuverability, industrial robots offer cutting-edge and lower-cost solutions than machine tools for bringing molded CFRP parts to their final shapes and sizes. However, for such applications, the robot must be very stiff for the machining operation to be generated. If the robot is not sufficiently stiff, deviations in the shape and position of the workpieces will occur. In this chapter, the machinability of CFRP with high-speed robotic end milling under varying cutting conditions is analyzed and evaluated. Cutting force, trajectory deviation and surface roughness are used as the machinability criteria.
AB - The demand for aircraft components with high mechanical and physical properties such as high strength, high stiffness, low weight, durability and extreme corrosion resistance has increased the popularity of CFRP. CFRP parts are usually produced by molding or near net shape processing. In some applications, however, trimming, milling and drilling are still required to bring CFRP parts to their final shapes and sizes. While the trimming of carbon fiber is generally carried out with CNC machine tools, however, the process is relatively slow due to the low flexibility ofmachine tools, their high up-front costs and their higher operating costs. Thanks to their adaptability, programmability, high dexterity and good maneuverability, industrial robots offer cutting-edge and lower-cost solutions than machine tools for bringing molded CFRP parts to their final shapes and sizes. However, for such applications, the robot must be very stiff for the machining operation to be generated. If the robot is not sufficiently stiff, deviations in the shape and position of the workpieces will occur. In this chapter, the machinability of CFRP with high-speed robotic end milling under varying cutting conditions is analyzed and evaluated. Cutting force, trajectory deviation and surface roughness are used as the machinability criteria.
UR - https://www.scopus.com/pages/publications/105040121731
U2 - 10.1515/9783110292251-004
DO - 10.1515/9783110292251-004
M3 - Book Chapter
AN - SCOPUS:105040121731
T3 - Advanced Composites
SP - 83
EP - 101
BT - Advanced Composites
A2 - Davim, J. Paulo
PB - Walter de Gruyter GmbH
ER -