Passer à la navigation principale Passer à la recherche Passer au contenu principal

Intra-and inter-repeatability of profile deviations of an alsi10mg tooling component manufactured by laser powder bed fusion

  • École de technologie supérieure

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

18 Citations (Scopus)

Résumé

Laser powder bed fusion (LPBF) is one of the most potent additive manufacturing (AM) processes. Metallic LPBF is gaining popularity, but one of the obstacles facing its larger industrial use is the limited knowledge of its dimensional and geometrical performances. This paper presents a metrological investigation of the geometrical and dimensional deviations of a selected LPBF-manufactured component, according to the ASME Y14.5-2009 standard. This approach allows for an estimation of both the process capability, as per ISO 22514-4 standard, and the correlations between the part location in the manufacturing chamber and the profile deviations. Forty-nine parts, which are representative of a typical aerospace tooling component (30 mm in diameter and 27.2 mm in height) were manufactured from AlSi10Mg powder using an EOSINT M280 printer and subjected to a stress relief annealing at 300◦C for two hours. This manufacturing procedure was repeated three times. A complete statistical analysis was carried out and the results of the investigation show that LPBF performances for all geometrical variations of 147 identical parts fall within a range of 230 µm at a 99.73% level.

Langue originaleAnglais
Numéro d'article56
RevueJournal of Manufacturing and Materials Processing
Volume2
Numéro de publication3
Les DOIs
ÉtatPublié - 2018

SDG des Nations Unies

Ce résultat contribue à ou aux Objectifs de développement durable suivants

  1. SDG 7 – Energie propre et d'un coût abordable
    SDG 7 – Energie propre et d'un coût abordable
  2. SDG 9 – Industrie, innovation et infrastructure
    SDG 9 – Industrie, innovation et infrastructure
  3. SDG 12 – Consommation et production durables
    SDG 12 – Consommation et production durables

Classification disciplinaire ASJC Scopus

  • Mécanique des matériaux
  • Ingénierie mécanique
  • Ingénierie industrielle et de fabrication

Empreinte digitale

Voici les principaux termes ou expressions associés à « Intra-and inter-repeatability of profile deviations of an alsi10mg tooling component manufactured by laser powder bed fusion ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource