Passer à la navigation principale Passer à la recherche Passer au contenu principal

Multi-Objective Optimization of Process Parameters in Resistance Spot Welding of A36 Mild Steel and Hot Dipped Galvanized Steel Sheets Using Non-dominated Sorting Genetic Algorithm

  • B. V. Feujofack Kemda
  • , N. Barka
  • , M. Jahazi
  • , D. Osmani
  • Université du Québec à Rimouski
  • AMH Canada Ltée

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

7 Citations (Scopus)

Résumé

Industry is constantly moving towards an increasing of production speed while minimizing production costs. This paper presents an efficient method for minimizing production times and energies through optimization of process parameters in resistance spot welding (RSW). Two grades of steel were used in this study, ASTM A36 steel and A653 hot dipped galvanized steel. Welding was done in overlap configuration, grade for grade, while following complete factorial plans. Micrographic analysis revealed welds microstructure while micro-indentation hardness tests enabled to establish hardness profiles along weld nuggets. Tensile-shear tests have been carried out in order to quantify the mechanical strength of welds. Analysis of variance showed that welding current is the most significant parameter and contributes for about 70% to welds mechanical strength. The ratio of hardness in the fusion zone to nugget surface area was found to be correlated with the failure mode of welded specimens. On that basis, a multi-objective optimization of the process parameters, through the non-dominated sorting genetic algorithm was performed. This optimization resulted in a reduction of current, electrode pressing force and welding time of 10.58%, 13.59% and 32.61% respectively. Optimized parameters were then assessed trough tensile-shear testing of welded specimens, all specimens passed the validation tests by experiencing failure in the base metal. Graphic Abstract: [Figure not available: see fulltext.]

Langue originaleAnglais
Pages (de - à)487-502
Nombre de pages16
RevueMetals and Materials International
Volume28
Numéro de publication2
Les DOIs
ÉtatPublié - févr. 2022

Classification disciplinaire ASJC Scopus

  • Physique de la matière condensée
  • Mécanique des matériaux
  • Métaux et alliages
  • Chimie des matériaux

Empreinte digitale

Voici les principaux termes ou expressions associés à « Multi-Objective Optimization of Process Parameters in Resistance Spot Welding of A36 Mild Steel and Hot Dipped Galvanized Steel Sheets Using Non-dominated Sorting Genetic Algorithm ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource