Passer à la navigation principale Passer à la recherche Passer au contenu principal

Prediction of leak rates through porous gaskets at high temperature

  • École de technologie supérieure

Résultats de recherche: Chapitre dans un livre, rapport, actes de conférence › Participation à un ouvrage collectif lié à un colloque ou une conférence › Revue par des pairs

3 Citations (Scopus)

Résumé

The ability of a gasket to maintain tightness under different operating conditions has been studied extensively in recent years. However most of the research studies conducted on leakage predictions was performed at room temperature. The aim of this work is to predict leakage through gaskets take into account the effect of the temperature on the fluid properties changes and gasket internal structural characteristics. The analytical model of slip flow regime to evaluate the mass leak rates through a porous gasket developed in [1] was used in this study. The results from the model were validated and compared with experimental data obtained from tests conducted on the Universal Gasket Rig with two different gases (Helium, Nitrogen). The leak rates measured are in the range of 1 to 10-4 mg/s, which is measurable using a pressure rise technique. As a second objective the influence of the gasket displacements caused by stress and temperature on the flow leakage was studied. A relationship between displacement or void thickness and leakage is clearly demonstrated. The slip flow regime model is capable of predicting leakage at temperature with reasonable accuracy.

Langue originaleAnglais
titreComputer Technology and Bolted Joints
EditeurAmerican Society of Mechanical Engineers (ASME)
Pages215-221
Nombre de pages7
ISBN (imprimé)9780791855010
Les DOIs
ÉtatPublié - 2012
EvénementASME 2012 Pressure Vessels and Piping Conference, PVP 2012 - Toronto, ON, Canada
Durée: 15 juil. 2012 → 19 juil. 2012

Série de publications

NomAmerican Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP
Volume2
ISSN (imprimé)0277-027X

Conférence

ConférenceASME 2012 Pressure Vessels and Piping Conference, PVP 2012
Pays/TerritoireCanada
La villeToronto, ON
Période15/07/12 → 19/07/12

Classification disciplinaire ASJC Scopus

  • Ingénierie mécanique

Empreinte digitale

Voici les principaux termes ou expressions associés à « Prediction of leak rates through porous gaskets at high temperature ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource