Passer à la navigation principale Passer à la recherche Passer au contenu principal

Resistance welding of thermoplastic composites skin/stringer joints

  • M. Dubé
  • , P. Hubert
  • , A. Yousefpour
  • , J. Denault
  • McGill University
  • National Research Council of Canada

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

101 Citations (Scopus)

Résumé

An experimental investigation of resistance welding of APC-2/AS4 PEEK/carbon fibre composite using a stainless steel mesh heating element is presented. A special specimen geometry, the skin/stringer configuration, was used to represent a typical reinforced aerospace structural joint. The specimens consisted of a flange, representing a stringer or frame, welded onto a skin laminate. The effects of the welding parameters such as the input power level and clamping distance on the weld quality and performance were investigated. The welding parameters were optimised using short beam shear tests, ultrasonic C-scan inspection and optical microscopy. The mechanical performance of the resistance-welded skin/stringer configuration was investigated using three- and four-point bending tests and the failure mechanisms were characterised by optical and scanning electron microscopy. Two methods were used to reduce the stress concentration at the flange tip. The first method was to machine a 20° taper angle at the edge of the flange and the second one was to create a resin fillet at the flange tip. No mechanical performance improvement was obtained with the resin fillet method but the taper angle method showed 25% mechanical performance improvement when the taper angles were machined after the welding operation.

Langue originaleAnglais
Pages (de - à)2541-2552
Nombre de pages12
RevueComposites Part A: Applied Science and Manufacturing
Volume38
Numéro de publication12
Les DOIs
ÉtatPublié - déc. 2007
Modification externeOui

Classification disciplinaire ASJC Scopus

  • Céramiques et composites
  • Mécanique des matériaux

Empreinte digitale

Voici les principaux termes ou expressions associés à « Resistance welding of thermoplastic composites skin/stringer joints ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource