Passer à la navigation principale Passer à la recherche Passer au contenu principal

Role of intermediate wetting states in ice adhesion and debonding mechanisms: An experimental and numerical investigation

  • Samaneh Keshavarzi
  • , Gelareh Momen
  • , Derek Harvey
  • , Muhammad Shakeel Virk
  • , Reza Jafari
  • Université du Québec à Chicoutimi
  • University of Tromsø – The Arctic University of Norway

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

4 Citations (Scopus)

Résumé

Ice adhesion on structured surfaces is a critical challenge across industries, from transportation to energy. Superhydrophobic surfaces, engineered with micro-/nanostructures such as micropillars, offer potential solutions to reduce ice adhesion in various technological systems. In real-world applications, droplets on superhydrophobic surfaces may wet only the top asperities (Cassie state) or partially penetrate the microstructure, leading to intermediate wetting states. To understand how to design surfaces that exploit these wetting phenomena to minimize ice adhesion, we explore wetting states, including partial wetting, across various sample configurations. Hydrophobic and superhydrophobic silicon wafer surfaces with well-textured micro-cylindrical pillars are fabricated to evaluate ice adhesion strength using micro push-off tests. Results indicate that patterning the surfaces can reduce ice adhesion strength by minimizing interfacial contact area. Among the various tested configurations, a specific sample with pillar diameter of 10 μm, a height of 20 μm, and a pillar spacing of 20 μm demonstrated the lowest ice adhesion strength at −20℃ for a 10 µL frozen water droplet. Interestingly, increasing the spacing between micropillars initially decreases ice adhesion strength, followed by a subsequent increase beyond a threshold value. Additionally, two different debonding modes were observed during the micro push-off tests for ice in the intermediate wetting state; translational and rotational. Finite element analysis simulations were performed to better understand the differences in the stress-state of the interface at the failure load. The results highlight the critical role of surface geometry and droplet shape on the shear and normal stress distributions at the interface. This comprehensive study offers valuable insights into the influence of microstructural features on ice adhesion and contribute to the development of surfaces engineered for controlled ice adhesion properties.

langue originaleAnglais
Numéro d'article136669
journalColloids and Surfaces A: Physicochemical and Engineering Aspects
Volume715
Les DOIs
étatPublié - 20 juin 2025
Modification externeOui

Classification disciplinaire ASJC Scopus

  • Surfaces et interfaces
  • Chimie physique et théorique
  • Chimie des colloïdes et des surfaces

Empreinte digitale

Voici les principaux termes ou expressions associés à « Role of intermediate wetting states in ice adhesion and debonding mechanisms: An experimental and numerical investigation ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource