Passer à la navigation principale Passer à la recherche Passer au contenu principal

Structural, physical, chemical, and biological surface characterization of thermomechanically treated Ti-Nb-based alloys for bone implants

  • Vadim Sheremetyev
  • , Mikhail Petrzhik
  • , Yulia Zhukova
  • , Alibek Kazakbiev
  • , Anastasia Arkhipova
  • , Mikhail Moisenovich
  • , Sergey Prokoshkin
  • , Vladimir Brailovski
  • National University of Science and Technology "MISiS"
  • Lomonosov Moscow State University
  • M.F. Vladimirsky Moscow Regional Research and Clinical Institute

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

25 Citations (Scopus)

Résumé

Metastable near-beta Ti-21.8Nb-6Zr and Ti-19.7Nb-5.8Ta (at%) alloys were subjected to a thermomechanical treatment comprising cold rolling (CR) with a true strain of e = 0.3 and post-deformation annealing (PDA) in the 500–900°C temperature range to ensure the superelastic behavior which is important for bone implants. It was found that PDA resulted in formation of about 1–2 μm-thick oxide layer on the Ti-Nb-Zr and Ti-Nb-Ta alloy samples; the layer was mainly composed of TiO2, in rutile and anatase modifications. The structure, the phase and chemical compositions, and some surface-sensitive properties of the alloys were compared to those of Ti-50.7Ni and Ti-Grade2 reference materials. These surface layers (especially that of the Ti-Nb-Zr alloy) demonstrated a promising combination of high cohesion strength (load causing surface layer fracture is over 25 N), hardness (∼12 GPa), and hydrophilicity (contact angle ∼40°). Surface modification by controlled oxidation during air annealing increases corrosion resistance and enhances in vivo osteoinductive properties of Ti-Nb-Zr alloys by changing the surface microrelief, increasing the surface wettability, and improving the mechanical characteristics, thus laying the foundation for the development of medical implants with prolonged service life. So, it was confirmed that the same thermomechanical treatment, which creates conditions for the superelastic behavior of the bulk metal (CR: e = 0.3 + PDA = 500–700°C for 1 hr), would also create a strong, protective and biocompatible layer on the implant surface.

Langue originaleAnglais
Pages (de - à)647-662
Nombre de pages16
RevueJournal of Biomedical Materials Research - Part B Applied Biomaterials
Volume108
Numéro de publication3
Les DOIs
ÉtatPublié - 1 avr. 2020

Classification disciplinaire ASJC Scopus

  • Biomatériaux
  • Ingénierie biomédicale

Empreinte digitale

Voici les principaux termes ou expressions associés à « Structural, physical, chemical, and biological surface characterization of thermomechanically treated Ti-Nb-based alloys for bone implants ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource