Passer à la navigation principale Passer à la recherche Passer au contenu principal

Structure formation during thermomechanical processing of Ti-Nb-(Zr, Ta) alloys and the manifestation of the shape-memory effect

  • S. M. Dubinskiy
  • , S. D. Prokoshkin
  • , V. Brailovski
  • , K. E. Inaekyan
  • , A. V. Korotitskiy
  • , M. R. Filonov
  • , M. I. Petrzhik
  • National University of Science and Technology "MISiS"
  • École de technologie supérieure

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

40 Citations (Scopus)

Résumé

The formation of structure during thermomechanical processing by the regime of cold plastic deformation by rolling and postdeformation annealing (PDA) and its influence on the mechanical properties of Ti-Nb-(Zr, Ta) shape-memory alloys (SMAs) have been investigated. A moderate strain (e ≈ 0.3) leads to the formation of a developed dislocation substructure in the β phase. With going to severe plastic deformation (e ≈ 2), a nanocrystalline structure can locally be formed without the amorphization of the structure. There are also present α-', α-, ω phases in the deformed alloys. When the PDA (1 h) is performed below 450°C, the structure of the β phase changes only slightly. Above 450°C, a polygonized substructure is formed in the β phase, which is nanosubgrained at an annealing temperature of 500°C and transforms completely into a submicron one at 600°C. In the case of severe plastic deformation to e ≈ 2, in this range of annealing temper-atures, high-angle misorientations of blocks are also observed. The recrystallization of the β phase in the Ti-Nb-(Zr, Ta) SMAs develops at temperatures above 600°C. The presence of the ω phase is detected at temperatures of up to 550°C. The lattice parameters of the strain-induced α'' martensite formed in the Ti-Nb-Ta alloy are independent of the PDA temperature in the range from 600 to 900°C, where the polygonized substructure transforms into the recrystallized structure of the β phase. The range of PDA temperatures that are most favorable for the manifestation of the effect of superelasticity in the Ti-Nb-(Zr, Ta) alloys is in the vicinity of 600°C.

Langue originaleAnglais
Pages (de - à)503-516
Nombre de pages14
RevuePhysics of Metals and Metallography
Volume112
Numéro de publication5
Les DOIs
ÉtatPublié - nov. 2011

Classification disciplinaire ASJC Scopus

  • Physique de la matière condensée
  • Chimie des matériaux

Empreinte digitale

Voici les principaux termes ou expressions associés à « Structure formation during thermomechanical processing of Ti-Nb-(Zr, Ta) alloys and the manifestation of the shape-memory effect ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource