Skip to main navigation Skip to search Skip to main content

A Study of Optimizing Lamb Wave Acoustic Mass Sensors’ Performance through Adjustment of the Transduction Electrode Metallization Ratio

  • Fatemeh Gholami
  • , Andy Shih
  • , Alexandre Robichaud
  • , Paul Vahe Cicek
  • Université du Québec à Montréal
  • Université du Québec à Chicoutimi

Research output: Contribution to journal › Journal Article › peer-review

2 Citations (Scopus)

Abstract

This paper presents the design and simulation of a mass sensitive Lamb wave microsensor with CMOS technology provided by SilTerra. In this work, the effects of the metalization ratio variation on the transmission gain, total harmonic distortion (THD), and two different resonant modes (around 66 MHz and 86 MHz) are shown. It has been found that the metalization ratio can be adjusted in order to obtain a compromise between transmission gain and sensitivity, depending on the design criteria. By adding a Si (Formula presented.) N (Formula presented.) layer on top of the device, a five-fold improvement in transmission gain is reached. It was also shown that the transmission of the input differential IDT configuration is 20% more efficient than a single terminal. With this combination, the mass sensitivity is about 114 [cm (Formula presented.) /gr].

Original languageEnglish
Article number6428
JournalSensors
Volume22
Issue number17
DOIs
Publication statusPublished - Sept 2022

Keywords

  • CMOS
  • THD
  • acoustic microsensor
  • lamb wave
  • mass sensing
  • metalization ratio
  • microsensor

ASJC Scopus subject areas

  • Analytical Chemistry
  • Information Systems
  • Atomic and Molecular Physics, and Optics
  • Biochemistry
  • Instrumentation
  • Electrical and Electronic Engineering

Fingerprint

Dive into the research topics of 'A Study of Optimizing Lamb Wave Acoustic Mass Sensors’ Performance through Adjustment of the Transduction Electrode Metallization Ratio'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this