Passer à la navigation principale Passer à la recherche Passer au contenu principal

A Study of Optimizing Lamb Wave Acoustic Mass Sensors’ Performance through Adjustment of the Transduction Electrode Metallization Ratio

  • Fatemeh Gholami
  • , Andy Shih
  • , Alexandre Robichaud
  • , Paul Vahe Cicek
  • Université du Québec à Montréal
  • Université du Québec à Chicoutimi

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

2 Citations (Scopus)

Résumé

This paper presents the design and simulation of a mass sensitive Lamb wave microsensor with CMOS technology provided by SilTerra. In this work, the effects of the metalization ratio variation on the transmission gain, total harmonic distortion (THD), and two different resonant modes (around 66 MHz and 86 MHz) are shown. It has been found that the metalization ratio can be adjusted in order to obtain a compromise between transmission gain and sensitivity, depending on the design criteria. By adding a Si (Formula presented.) N (Formula presented.) layer on top of the device, a five-fold improvement in transmission gain is reached. It was also shown that the transmission of the input differential IDT configuration is 20% more efficient than a single terminal. With this combination, the mass sensitivity is about 114 [cm (Formula presented.) /gr].

langue originaleAnglais
Numéro d'article6428
journalSensors
Volume22
Numéro de publication17
Les DOIs
étatPublié - sept. 2022

Classification disciplinaire ASJC Scopus

  • Chimie analytique
  • Systèmes d'information
  • Physique atomique et moléculaire, et optique
  • Biochimie
  • Instrumentation
  • Ingénierie électrique et électronique

Empreinte digitale

Voici les principaux termes ou expressions associés à « A Study of Optimizing Lamb Wave Acoustic Mass Sensors’ Performance through Adjustment of the Transduction Electrode Metallization Ratio ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource