Skip to main navigation Skip to search Skip to main content

Effects of Free-Cutting Elements Addition on the Microstructure, Hardness, and Machinability of Al-11%Si–Cu–Mg Casting Alloys

  • Y. Zedan
  • , A. M. Samuel
  • , H. W. Doty
  • , V. Songmene
  • , F. H. Samuel
  • École de technologie supérieure
  • Université du Québec à Chicoutimi
  • General Motors

Research output: Contribution to journal › Journal Article › peer-review

15 Citations (Scopus)

Abstract

The addition of small but effective amounts of free-machining elements to Al–Si casting alloys significantly improves the machinability of these alloys. These added elements, which are softer and have a lower melting point than the matrix alloy, form as small globules dispersed in the microstructure of the aluminum casting. In this form, the dispersed phase of low-melting elements promotes chip-breaking and helps to lubricate the cutting tool. The Al-11%Si-Cu-Mg alloys studied were mechanically tested in order to acquire an understanding of the effects of additives on the tensile properties under the same alloy conditions used for preparing the machinability test blocks. Drilling operations were carried out using a high-speed machining center under fixed cutting conditions. The machinability characteristics of these alloys were evaluated by examining the drilling forces and moments, tool life, and chip shape in each case. Results show that the addition of 0.15wt% Sn has a beneficial effect on the tool life of carbide drills, which may be ascribed to the precipitation of small and uniformly distributed β-Sn particles having a low melting point. Lead is not a suitable choice as an additive because of environmental concerns. Bismuth also has several detrimental effects associated with its presence in the Al–Si alloys, including the formation of the high melting point Bi2Mg3 phase, and the interaction of Bi with Sr, which is mainly added/required for Si modification. Thus, of the free-machining elements tested, Sn is the most promising in the context of improving the alloy machinability and mechanical properties.

Original languageEnglish
Pages (from-to)1915-1931
Number of pages17
JournalInternational Journal of Metalcasting
Volume16
Issue number4
DOIs
Publication statusPublished - Oct 2022

Keywords

  • 396 aluminum alloys
  • Bi
  • Pb
  • Sn additions
  • cutting forces
  • machinability
  • microstructure
  • tool life

ASJC Scopus subject areas

  • Mechanics of Materials
  • Industrial and Manufacturing Engineering
  • Metals and Alloys
  • Materials Chemistry

Fingerprint

Dive into the research topics of 'Effects of Free-Cutting Elements Addition on the Microstructure, Hardness, and Machinability of Al-11%Si–Cu–Mg Casting Alloys'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this