Passer à la navigation principale Passer à la recherche Passer au contenu principal

Effects of Free-Cutting Elements Addition on the Microstructure, Hardness, and Machinability of Al-11%Si–Cu–Mg Casting Alloys

  • Y. Zedan
  • , A. M. Samuel
  • , H. W. Doty
  • , V. Songmene
  • , F. H. Samuel
  • École de technologie supérieure
  • Université du Québec à Chicoutimi
  • General Motors

Résultats de recherche: Contribution à un journal › Article publié dans une revue, révisé par les pairs › Revue par des pairs

15 Citations (Scopus)

Résumé

The addition of small but effective amounts of free-machining elements to Al–Si casting alloys significantly improves the machinability of these alloys. These added elements, which are softer and have a lower melting point than the matrix alloy, form as small globules dispersed in the microstructure of the aluminum casting. In this form, the dispersed phase of low-melting elements promotes chip-breaking and helps to lubricate the cutting tool. The Al-11%Si-Cu-Mg alloys studied were mechanically tested in order to acquire an understanding of the effects of additives on the tensile properties under the same alloy conditions used for preparing the machinability test blocks. Drilling operations were carried out using a high-speed machining center under fixed cutting conditions. The machinability characteristics of these alloys were evaluated by examining the drilling forces and moments, tool life, and chip shape in each case. Results show that the addition of 0.15wt% Sn has a beneficial effect on the tool life of carbide drills, which may be ascribed to the precipitation of small and uniformly distributed β-Sn particles having a low melting point. Lead is not a suitable choice as an additive because of environmental concerns. Bismuth also has several detrimental effects associated with its presence in the Al–Si alloys, including the formation of the high melting point Bi2Mg3 phase, and the interaction of Bi with Sr, which is mainly added/required for Si modification. Thus, of the free-machining elements tested, Sn is the most promising in the context of improving the alloy machinability and mechanical properties.

Langue originaleAnglais
Pages (de - à)1915-1931
Nombre de pages17
RevueInternational Journal of Metalcasting
Volume16
Numéro de publication4
Les DOIs
ÉtatPublié - oct. 2022

Classification disciplinaire ASJC Scopus

  • Mécanique des matériaux
  • Ingénierie industrielle et de fabrication
  • Métaux et alliages
  • Chimie des matériaux

Empreinte digitale

Voici les principaux termes ou expressions associés à « Effects of Free-Cutting Elements Addition on the Microstructure, Hardness, and Machinability of Al-11%Si–Cu–Mg Casting Alloys ». Ces libellés thématiques sont générés à partir du titre et du résumé de la publication. Ensemble, ils forment une empreinte digitale unique.

Citer cette ressource