Skip to main navigation Skip to search Skip to main content

Jet noise simulation with realistic nozzle geometries using fully unstructured LES solver

  • Université de Sherbrooke

Research output: Contribution to Book/Report types › Contribution to conference proceedings › peer-review

21 Citations (Scopus)

Abstract

Different jet simulations with realistic nozzle geometries for single and dual jets are performed using the fully unstructured Large Eddy Simulation solver AVBP. Two single jet nozzle geometries from NASA are considered: the Single Metal Chevron 000 which is the base line of the series and the Acoustic Reference Nozzle 2 (ARN2). Both are convergent nozzle but with different section variations. Isothermal Mach 0.9 jets at moderate Reynolds number are simulated using these nozzles. The operating condition corresponds to the set point 7 of Tanna matrix. Grids with different resolutions are used and perturbations are injected in boundary layers to get a fully turbulent mixing layer at the nozzle exit. Apart from a laminar to turbulent transition at the nozzle exit, results show a good agreement with experimental data in terms of aerodynamics and acoustics. A co-axial jet nozzle geometry experimentally studied at the P' Institute of Poitiers is also simulated. It is a isothermal configuration with a primary jet Mach number of 0.5 and a secondary jet Mach number of 0.35. This low Mach configuration makes it more challenging as the noise level reduces and the acoustic propagation is slower. For the mean flow quantities, an overall good agreement with experimental measurements is obtained. However the flow dynamics is dominated by a strong vortex pairing phenomenon due to the late laminar to turbulent transition of the mixing layers and the discretization of their interactions on the present grid might be unsufficient. Different jet simulations with realistic nozzle geometries for single and dual jets are performed using the fully unstructured Large Eddy Simulation solver AVBP. Two single jet nozzle geometries from NASA are considered: the Single Metal Chevron 000 which is the base line of the series and the Acoustic Reference Nozzle 2 (ARN2). Both are convergent nozzle but with different section variations. Isothermal Mach 0.9 jets at moderate Reynolds number are simulated using these nozzles. The operating condition corresponds to the set point 7 of Tanna matrix. Grids with different resolutions are used and perturbations are injected in boundary layers to get a fully turbulent mixing layer at the nozzle exit. Apart from a laminar to turbulent transition at the nozzle exit, results show a good agreement with experimental data in terms of aerodynamics and acoustics. A co-axial jet nozzle geometry experimentally studied at the P' Institute of Poitiers is also simulated. It is a isothermal configuration with a primary jet Mach number of 0.5 and a secondary jet Mach number of 0.35. This low Mach configuration makes it more challenging as the noise level reduces and the acoustic propagation is slower. For the mean flow quantities, an overall good agreement with experimental measurements is obtained. However the flow dynamics is dominated by a strong vortex pairing phenomenon due to the late laminar to turbulent transition of the mixing layers and the discretization of their interactions on the present grid might be unsufficient.

Original languageEnglish
Title of host publication18th AIAA/CEAS Aeroacoustics Conference (33rd AIAA Aeroacoustics Conference)
PublisherAmerican Institute of Aeronautics and Astronautics Inc.
ISBN (Print)9781600869327
DOIs
Publication statusPublished - 2012
Externally publishedYes
Event18th AIAA/CEAS Aeroacoustics Conference 2012 (33rd AIAA Aeroacoustics Conference) - , United States
Duration: 4 Jun 2012 → 6 Jun 2012

Publication series

Name18th AIAA/CEAS Aeroacoustics Conference (33rd AIAA Aeroacoustics Conference)

Conference

Conference18th AIAA/CEAS Aeroacoustics Conference 2012 (33rd AIAA Aeroacoustics Conference)
Country/TerritoryUnited States
Period4/06/12 → 6/06/12

ASJC Scopus subject areas

  • Aerospace Engineering
  • Mechanical Engineering
  • Acoustics and Ultrasonics

Fingerprint

Dive into the research topics of 'Jet noise simulation with realistic nozzle geometries using fully unstructured LES solver'. These topics are generated from the title and abstract of the publication. Together, they form a unique fingerprint.

Cite this